publicações selecionadas
-
artigo académico
- Durability properties of lightweight concrete with ceramic mould casting waste. Magazine of Concrete Research. 2024
- Performance of Eco-Friendly Cement Mortars Incorporating Ceramic Molds Shells and Paraffin Wax. Materials. 2023
- Alkali-Activated Cements from Urban, Mining and Agro-Industrial Waste: State-of-the-art and Opportunities. Production Planning and Control. 2020
- Sustainable alkaline activation of fly ash, aluminium anodising sludge and glass powder blends with a recycled alkaline cleaning solution. Engineering Fracture Mechanics. 2019
- Statistical Study of Curing Conditions in Alkali Activation of Mine Tailings. Environmental Geotechnics. 2019
- Non-structural Performance of Pastes and Mortars Fabricated from Alkali Activated Electric Arc Furnace Slag. Current Trends in Civil & Structural Engineering. 2019
- Alkali-Activated Fly Ashes: Influence of Curing Conditions on Mechanical Strength. U.Porto Journal of Engineering. 2018
- Experimental study of the Cu-Al-Sn phase equilibria, close to the copper zone. Journal of Mining and Metallurgy Section B-Metallurgy. 2017
- Statistical Analysis of the Influence of Several Factors on Compressive Strength of Alkali Activated Fly Ash. Procedia Structural Integrity. 2017
- Development of a Process for Copper Recovering from Galvanic Sludges. Key Engineering Materials. 2013
- Evaluation of the Energetic Valorization Potential of Polymeric and Textile Industrial Wastes. Key Engineering Materials. 2013
- Kinetic Study of Thermal De-Chlorination of PVC-Containing Waste. Key Engineering Materials. 2013
- Evaluation of Pellets Produced with Undergrowth to be Used as Biofuel. Production Planning and Control. 2012
- Alternative Feedstocks for Biodiesel Production. Key Engineering Materials. 2012
- Technical Aspects of Adsorption Process onto an Innovative Eggshell-Derived Low-Cost Adsorbent. Key Engineering Materials. 2012
- Effect of the bismuth content on the interface reactions between copper substrate and Sn-Zn-Al-Bi lead-free solder. Revista de Metalurgia. 2010
- Thermodynamic assessment of the Bi-Sn-Zn System. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 2007
- Experimental Phase Diagram of the Ternary Bi-Sn-Zn. Key Engineering Materials. 2006
- Kinetic study of the immobilization of galvanic sludge in clay-based matrix. Journal of Hazardous Materials. 2005
- Effect of the Bi Content on the Mechanical Properties of a Sn-Zn-Al-Bi Solder Alloy. Key Engineering Materials. 2004
- Leaching of Brasses in Long-Term Direct Contact with Water. Key Engineering Materials. 2004
- Effect of experimental variables on the inertization of galvanic sludges in clay-based ceramics. Journal of Hazardous Materials. 2004
- Attempts of incorporation of metal plating sludges in ceramic products. Industrial Ceramics. 2001
- Attempts of incorporation of metal plating sludges in ceramic products | Prove di inglobamento di fanghi da placcatura di metalli in prodotti ceramici. Ceramurgia. 2001
- Cement-Waste and Clay-Waste Derived Products from Metal Wastes. Process Safety and Environmental Protection. 2001
- Cement-waste and clay-waste derived products from metal hydroxides wastes: Environmental characterization. Process Safety and Environmental Protection. 2001
- Attempts of incorporation of metal plating sludges in ceramic products | Prove di incorporazione in prodotti ceramici di fanghi derivanti da rivestimenti metallici. Ceramurgia. 2000
- Chemical Modification of Pure Titanium Surfaces for Oral Implants. Implant Dentistry. 1999
- Study of the effect of zirconium addition to the Al-rich alloys of the Al-Cu and Al-Cu-Mg systems. Berichte der Bunsen-Gesellschaft-Physical Chemistry Chemical Physics. 1998
- Modeling of chemical wear in ferrous alloys/silicon nitride contacts during high speed cutting. Acta Materialia. 1998
- Study of phase equilibria in the Al-Cu-Zr system at the Al-rich part. Journal de Chimie Physique et de Physico-Chimie Biologique. 1997
- Isopiestic determination of the coefficients of activity of magnesium in Al¿Cu¿Mg liquid alloys. Journal of Alloys and Compounds. 1995
- Experimental Liquidus Points and Invariant Reactions in the Cu-Zr System. International Journal of Materials Research. 1988
-
artigo de conferência
- Evolution of the tensile response of unidirectional hybrid FRP laminates fabricated by hand lay-up method: Experimental and analytic assessment 2018
- Incorporation of metallurgical wastes as inorganic fillers in resins 2018
- Mechanical Properties of Fly Ash Geopolymers containing Steelmaking Ladle Slag, 2017
- Fracture Behavior in Geopolymer Mixtures including Fly Ash and various Industrial Waste 2017
- Mechanical Properties of Fly Ash Geopolymers incorporating Wastes from Ferrous Foundry and Stone Cutting Sludge 2017
- Tribologial Behavior of Geopolymer Mixtures including Fly Ash and various Industrial Wastes 2017
- Fractionation of oily sludges produced in the treatment of hydrocarbon wastes 2015
- Use of different inorganic solid wastes to produce glass foams 2015
- Wastes: Solutions, treatments and opportunities: Selected papers from the 3rd edition of the international conference on wastes: solutions, treatments and opportunities, Viana Do Castelo, Portugal, 14-16 september 2015 2015
-
artigo de revista
- Experimental Characterisation of Different Ecological Substrates for Use in Green Roof Systems. Sustainability (MDPI). 2022
- Characterization of Stainless Steel Spent Pickling Sludge and Prospects for Its Valorization. Metals. 2022
- Iron and Aluminium Production Wastes as Exclusive Components of Alkali Activated Binders—Towards a Sustainable Alternative. Sustainability (MDPI). 2021
- Compressed earth blocks stabilized with glass waste and fly ash activated with a recycled alkaline cleaning solution. Journal of Cleaner Production. 2021
- Unsaturated Response of Clayey Soils Stabilised with Alkaline Cements. Biomolecules. 2020
- Analytical hybrid effect prediction and evolution of the tensile response of unidirectional hybrid fibre-reinforced polymers composites for civil engineering applications. Journal of Composite Materials. 2020
- Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam. Cement & Concrete Composites. 2019
- Using foundry slag of ferrous metals as fine aggregate for concrete. Resources, Conservation and Recycling. 2018
- Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar. Cement & Concrete Composites. 2017
- Effects of different environmental conditions on the mechanical characteristics of a structural epoxy. Composite Structures. 2016
- Luiz Bandeira Bridge: Assessment of a Historical Reinforced Concrete (RC) Bridge. International Journal of Architectural Heritage. 2013
- Study of a Two Steps Process for the Valorization of PVC-Containing Wastes. Production Planning and Control. 2013
- Kinetics of thermal de-chlorination of PVC under pyrolytic conditions. Waste Management. 2012
- Alternative Low-cost Adsorbent for Water and Wastewater Decontamination Derived from Eggshell Waste: An Overview. Production Planning and Control. 2011
- Handmade Clay Bricks: Chemical, Physical and Mechanical Properties. International Journal of Architectural Heritage. 2010
- Utilisation of pulp and paper industry wastes as raw materials in cement clinker production. International Journal of Materials Engineering Innovation. 2009
- Influence of the chemical composition on the machinability of brasses. Journal of Materials Processing Technology. 2005
- Leaching behaviour of a galvanic sludge in sulphuric acid and ammoniacal media. Journal of Hazardous Materials. 2005
- Physical and chemical characterisation of metal finishing industrial wastes. Journal of Environmental Management. 2005
- Solvent extraction applied to the recovery of heavy metals from galvanic sludge. Journal of Hazardous Materials. 2005
- Contribution to the knowledge of the Cu-Sn-Zn system for compositions close to brass alloys. Journal of Alloys and Compounds. 2004
- Role of the mixing conditions and composition of galvanic sludges on the inertization process in clay-based ceramics. Journal of Hazardous Materials. 2004
- Phase equilibria of the Al-Cu-Zn system for compositions close to brass alloys. Journal of Phase Equilibria. 2003
- Cations extraction of sandy-clay soils from cavado valley, Portugl, using sodium salts solutions,Extração de cátions em solos areno-argilosos do vale do cávado, Portugal, utilizando soluções de sais de sódio. Scientia Agrícola. 2002
- Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slags. Cement and Concrete Research. 2000
-
capítulo de livro
- Design Methodologies for Sustainable Products from Mixed Waste Plastics and Foundry Sands 2024
- Employment of industrial wastes as agents for inclusion modification in molten steels, Wastes - Solutions, treatments, opportunities 2017
- Incorporation of metallurgical wastes as inorganic fillers in resins 2017
-
documento
- Ancient Clay Bricks: Manufacture and Properties 2010
- Mould release system for the marine industry 2009
- The importance of surface conditioning in mould preparation 2009
- Effective mould release for RTM processes 2006
- Production of magnetite powder and recovery of non-ferrous metals from steel making residues 2000
-
livro
- Technical aspects of adsorption process onto an innovative eggshell- derived low-cost adsorbent 2013
- Campeonatos do Mundo de Hóquei em Patins: contributos para a sua história 2011
- Wastes: Solutions, Treatments and Opportunities 2011
- Experimental phase diagram of the ternary Bi-Sn-Zn 2006
- Effect of the Bi content on the mechanical properties of a Sn-Zn-Al-Bi solder alloy 2004
- Leaching of brasses in long-term direct contact with water 2004
- Production of magnetite powder and recovery of non-ferrous metals from steel making residues 2000
- Ensino da Engenharia Metalúrgica e de Materiais em Portugal 1997