Local de publicação venue para
- Durability of bond of EBR CFRP laminates to concrete under real-time field exposure and laboratory accelerated ageing 2023
- Feasibility of mechanical post-tensioning of annealed glass beams by activating externally bonded Fe-SMA reinforcement 2023
- Experimental characterization of the nonlinear thermomechanical behaviour of refractory masonry with dry joints 2023
- Hardening characterisation of a non-proprietary and more eco-friendly UHPC 2023
- Organic-inorganic hybrid sol-gel membranes for pH sensing in highly alkaline environment 2022
- A new method for the identification of cohesive laws under pure loading modes 2022
- Cement mortars with ceramic molds shells and paraffin waxes wastes: Physical and mechanical behavior 2022
- Use of data mining techniques to explain the primary factors influencing water sensitivity of asphalt mixtures 2022
- Experimental evaluation of cohesive laws components of mixed-mode I + II fracture characterization of cortical bone 2022
- Analysis of the effect of incorporating construction and demolition waste on the environmental and mechanical performance of earth-based mixtures 2022
- Synergetic effect of biomass fly ash on improvement of high-volume coal fly ash concrete properties 2022
- Durability of an UHPFRC under mechanical and chloride loads 2021
- Optimisation of Compressed Earth Blocks (CEBs) using natural origin materials: A systematic literature review 2021
- A new inverse analysis approach for predicting the fracture mode I parameters of fibre reinforced concrete 2021
- Surface rehabilitation of Portland cement concrete (PCC) pavements using single or double surface dressings with soft bitumen, conventional or modified emulsions 2021
- Experimental characterization of adobe vaults strengthened with a TRM-based compatible composite 2021
- Assessing the potential of application of titanium dioxide for photocatalytic degradation of deposited soot on asphalt pavement surfaces 2021
- Development of sandwich panels for multi-functional strengthening of RC buildings: Characterization of constituent materials and shear interaction of panel assemblies 2021
- Durability of an UHPC containing spent equilibrium catalyst 2021
- Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers 2020
- Evaluation of CNT/GNP's synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method 2020
- Properties of a new material based on a gypsum matrix incorporating waste brick 2020
- The effect of surface treatment and environmental actions on the adhesive connection between GFRP laminate surface and fresh FRC 2020
- Hydraulic lime mortars incorporating micro cork granules with antifungal properties 2020
- A meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures 2020
- Additive manufacturing effect on the mechanical behaviour of architectural stoneware bricks 2020
- Assessment of GFRP bond behaviour for the design of sustainable reinforced seawater concrete structures 2020
- Behavior of cementitious mortars with direct incorporation of non-encapsulated phase change material after severe temperature exposure 2020
- Sustainable polymer-based Phase Change Materials for energy efficiency in buildings and their application in aerial lime mortars 2020
- Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam 2019
- Effect of temperature on the fracture toughness of wood under mode I quasi-static loading 2019
- Experimental and numerical analyses of wood boards joining using wood-pin connectors 2019
- Effects of extreme environmental exposure conditions on the mechanical behaviour of traditional carpentry joints 2019
- The effect of prolonged storage time on asphalt rubber binder properties 2019
- Effect of steel fiber and carbon black on the self-sensing ability of concrete cracks under bending 2019
- Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites 2019
- Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar 2019
- Using waste polymers as a reliable alternative for asphalt binder modification - Performance and morphological assessment 2019
- Assessment of different methods for characterization and simulation of post-cracking behavior of self-compacting steel fiber reinforced concrete 2019
- Comparison of the performance of hydraulic lime- and clay-based grouts in the repair of rammed earth 2018
- Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages 2018
- Modal analysis of historical masonry structures: Linear perturbation and software benchmarking 2018
- Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression 2018
- Fracture behavior of wood-steel dowel joints under quasi-static loading 2018
- COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage 2018
- Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications 2018
- Effect of the calcinations temperatures of phosphate washing waste on the structural and mechanical properties of geopolymeric mortar 2018
- Integrating geomatic approaches, Operational Modal Analysis, advanced numerical and updating methods to evaluate the current safety conditions of the historical Bôco Bridge 2018
- Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar 2017
- Influence of fibre reinforcement on the post-cracking behaviour of a cement-stabilised sandy-clay subjected to indirect tensile stress 2017
- Using data mining algorithms to predict the bond strength of NSM FRP systems in concrete 2016
- Bone fracture characterization under mixed-mode I + II loading using the MMB test 2016
- Experimental analysis of Maritime pine and Iroko single shear dowel-type connections 2016
- A two-phase material approach to model steel fibre reinforced self-compacting concrete in panels 2016
- Effectiveness of the repair of unstabilised rammed earth with injection of mud grouts 2016
- Experimental and numerical research on the potentialities of layered reinforcement configuration of continuous sisal fibers for thin mortar panels 2016
- Fibre reinforced mortar application for out-of-plane strengthening of schist walls 2016
- Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire 2016
- Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures 2016
- Reliability-based assessment of existing masonry arch railway bridges 2016
- Analysis and strengthening of carpentry joints 2015
- Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems 2015
- High performance fiber reinforced concrete for the shear reinforcement: Experimental and numerical research 2015
- Influence of casting condition on the anisotropy of the fracture properties of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC) 2015
- Mechanical characterisation of dry-stack masonry made of CEBs stabilised with alkaline activation 2015
- Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling 2014
- Dimensional variation of three softwood due to hygroscopic behavior 2014
- Experimental characterization of physical and mechanical properties of schist from Portugal 2014
- Fibres for enhancing of the bond capacity between GFRP rebar and concrete 2014
- Numerical modelling and parametric analysis of bond strength of masonry members retrofitted with FRP 2014
- Proposal of an innovative solution for partition walls : mechanical, thermal and acoustic validation 2013
- A model for the prediction of the punching resistance of steel fibre reinforced concrete slabs centrically loaded 2013
- Bond between glulam and NSM CFRP laminates 2013
- Rammed earth construction with granitic residual soils : the case study of northern Portugal 2013
- Rheological properties of alkaline activated fly ash used in jet grouting applications 2013
- Strain hardening fiber reinforced cement composites for the flexural strengthening of masonry elements of ancient structures 2013
- Properties and durability of HPC with tyre rubber wastes 2012
- Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction 2012
- Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature 2012
- Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete 2011
- Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents 2010
- Structural analysis of two King-post timber trusses: Non-destructive evaluation and load-carrying tests 2010
- Reinforced brick masonry light vaults: Semi-prefabrication, construction, testing and numerical modeling 2010
- Vertically perforated clay brick masonry for loadbearing and non-loadbearing masonry walls 2010
- Assessing the effectiveness of embedding CFRP laminates in the near surface for structural strengthening 2006
- Durability of polymeric pipes in contact with domestic products 1999
- Behavior of CFRP composites and epoxy adhesives after long-term exposure to outdoor and laboratory-controlled environments. 438:137201. 2024
- An advanced cement-based geocomposite with autonomous sensing and heating capabilities for enhanced intelligent transportation infrastructure. 411:134577. 2024
- Effectiveness of a TRM solution for rammed earth under in-plane cyclic loads. 407:133551. 2023
- Structural response of steel sandwich panels with PUR foam core subjected to edgewise compression: Experimental, numerical, and analytical considerations. 409:134009. 2023
- Application of self-sensing cement-stabilized sand for damage detection. 403:133080-133080. 2023
- Influence of air entrainers on the properties of hydrated lime mortars. 403:132968. 2023
- Two-dimensional integrated mixed-mode smeared crack model for simulating FRC structures. 289:109401. 2023
- Tensile behavior of textile-reinforced mortar: Influence of test setup and layer arrangement. 394:1-15. 2023
- Evaluation of non-destructive techniques for mechanical characterisation of earth-based mortars in masonry joints. 392:131960. 2023
- Mortar and concrete with lime-rich calcined clay pozzolana: A sustainable approach to enhancing performances and reducing carbon footprint. 393:132098. 2023
- A self-sensing and self-heating planar braided composite for smart civil infrastructures reinforcement. 387:131617-131617. 2023
- A sustainable cementitious composite reinforced with natural fibers: An experimental and numerical study. 378:131093. 2023
- Evaluation of use of marble and granite cutting waste to the production of self-compacting concrete. 345:128261-128261. 2022
- The double cantilever beam test applied to mode I fracture characterization of polyamide 12 processed by selective laser sintering technology. 269:108555. 2022
- The effect of using recycled PET aggregates on mechanical and durability properties of 3D printed mortar. 335:127443. 2022
- Authors closure to the Discussion of the Review article "Optimisation of Compressed earth blocks (CEBs) using natural origin materials: A systematic literature review". 325:126888. 2022
- Thermal performance characterization of cement-based lightweight blocks incorporating textile waste. 321:126330. 2022
- The Double Cantilever Beam test applied to mode I fracture characterization of Polyamide 12 processed by Selective Laser Sintering technology. 269. 2022
- Tensile properties of S355 butt welds after exposure to high temperatures. 302:124374. 2021
- Comparison of two criteria of stress intensity factor and fracture energy to investigate the behavior of asphalt mixtures under combined tensile-shear loading modes-A statistical approach. 290:123230. 2021
- Evaluation of sugarcane bagasse ash for lightweight aggregates production. 271:121604. 2021
- Impact of water on peak and residual shear strength parameters and triaxial deformability of high-porosity building calcarenite stones: Interconnection with their physical and petrological characteristics. 262:120789-120789. 2020
- A meso-scale discrete element method framework to simulate thermo-mechanical failure of concrete subjected to elevated temperatures 2020
- Numerical modeling based on moving mesh method to simulate fast crack propagation. 14:410-422. 2019
- Bonding performance of Portuguese Maritime pine glued laminated timber. 223:520-529. 2019
- Alkali-silica reaction in concrete: Mechanisms, mitigation and test methods. 222:903-931. 2019
- Bonding quality assessment of cross-layered Maritime pine elements glued with one-component polyurethane adhesive. 211:571-582. 2019
- Sustainable alkaline activation of fly ash, aluminium anodising sludge and glass powder blends with a recycled alkaline cleaning solution. 204:609-620. 2019
- Enhancement of brick-mortar shear bond strength using environmental friendly mortars 2019
- A numerical model based on ALE formulation to predict crack propagation in sandwich structures. 13:277-293. 2018
- Development and characterization of blended cements containing seashell powder. 161:292-304. 2018
- Developing enhanced modified bitumens with waste engine oil products combined with polymers. 160:714 - 724. 2018
- Dynamic debonding in layered structures: a coupled ALE-cohesive approach. 11:524-535. 2017
- Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road). 122:273-283. 2016
- Acoustic performance of timber and timber-concrete floors. 101:684-691. 2015
- Characterization of alkali-activated binders using the maturity method 2015
- Curing effect in the shrinkage of a lower strength self-compacting concrete 2015
- Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete 2014
- Cohesive zone model and quasibrittle failure of wood: A new light on the adapted specimen geometries for fracture tests. 109:328-340. 2013
- Evaluation of bone cohesive laws using an inverse method applied to the DCB test. 96:724-736. 2012
- Crack equivalent based method applied to wood fracture characterization using the single edge notched-three point bending test. 77:510-520. 2010
- A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test. 75:3852-3865. 2008