Local de publicação venue para
- Experimental characterisation of dry-joint masonry structures: Interface stiffness and interface damping 2023
- Durability of bond of EBR CFRP laminates to concrete under real-time field exposure and laboratory accelerated ageing 2023
- Mortars with the incorporation of treated ceramic molds shells wastes 2023
- Feasibility of mechanical post-tensioning of annealed glass beams by activating externally bonded Fe-SMA reinforcement 2023
- Experimental characterization of the nonlinear thermomechanical behaviour of refractory masonry with dry joints 2023
- Hardening characterisation of a non-proprietary and more eco-friendly UHPC 2023
- Organic-inorganic hybrid sol-gel membranes for pH sensing in highly alkaline environment 2022
- Early-age shrinkage and bond of LC-TRM strengthening in rammed earth 2022
- Three-dimensional braided composites as innovative smart structural reinforcements 2022
- Influence of adhesive stiffness on the post-cracking behaviour of CFRP-reinforced structural glass beams 2022
- Cement mortars with ceramic molds shells and paraffin waxes wastes: Physical and mechanical behavior 2022
- Use of data mining techniques to explain the primary factors influencing water sensitivity of asphalt mixtures 2022
- Melted and recrystallized holey-graphene-reinforced aluminum composites: Structure, elasticity and strength 2022
- Analysis of the effect of incorporating construction and demolition waste on the environmental and mechanical performance of earth-based mixtures 2022
- Innovative modeling framework of chloride resistance of recycled aggregate concrete using ensemble-machine-learning methods 2022
- Experimental, numerical and analytical investigations of masonry corners: Influence of the horizontal pseudo-static load orientation 2022
- New type of CFRP reinforcement and technique for the flexural strengthening of RC balconies 2022
- Synergetic effect of biomass fly ash on improvement of high-volume coal fly ash concrete properties 2022
- A review of intrinsic self-sensing cementitious composites and prospects for their application in transport infrastructures 2021
- An analytical bond stress-slip model for a TRM composite compatible with rammed earth 2021
- Durability of an UHPFRC under mechanical and chloride loads 2021
- Optimisation of Compressed Earth Blocks (CEBs) using natural origin materials: A systematic literature review 2021
- Innovative Self-Sensing Fiber-Reinforced Cemented Sand with Hybrid CNT/GNP 2021
- Advantages and shortcomings of the utilization of recycled wastes as aggregates in structural concretes 2021
- Generalized Analysis-oriented model of FRP confined concrete circular columns 2021
- Influence of chloride contamination on carbonation of cement-based materials 2021
- Review on the bond behavior and durability of FRP bars to concrete 2021
- Surface rehabilitation of Portland cement concrete (PCC) pavements using single or double surface dressings with soft bitumen, conventional or modified emulsions 2021
- Behaviour of the adhesive bond between low-grade wood and GFRP reinforcements using epoxy resin 2021
- Experimental characterization of adobe vaults strengthened with a TRM-based compatible composite 2021
- A micro-modeling approach for the prediction of TRM bond performance on curved masonry substrates 2021
- Aging of lime-based TRM composites under natural environmental conditions 2021
- Assessing the potential of application of titanium dioxide for photocatalytic degradation of deposited soot on asphalt pavement surfaces 2021
- Development of sandwich panels for multi-functional strengthening of RC buildings: Characterization of constituent materials and shear interaction of panel assemblies 2021
- Durability of an UHPC containing spent equilibrium catalyst 2021
- Enhanced massivity index based on evidence from case studies: Towards a robust pre-design assessment of early-age thermal cracking risk and practical recommendations 2021
- Experimental evaluation of out-of-plane strength of masonry walls retrofitted with oriented strand board 2021
- Flexural and shear strengthening of reinforced concrete beams with a hybrid CFRP solution 2021
- In-plane behaviour of rubble stone masonry walls: experimental, numerical and analytical approach 2021
- Influence of track foundation on the performance of ballast and concrete slab tracks under cyclic loading: physical modelling and numerical model calibration 2021
- Soft computing techniques for the prediction of concrete compressive strength using Non-Destructive tests 2021
- Expeditious damage index for arched structures based on dynamic identification testing 2020
- Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers 2020
- Evaluation of CNT/GNP's synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method 2020
- Scalable synthesis of robust and stretchable composite wound dressings by dispersing silver nanowires in continuous bacterial cellulose 2020
- Properties of a new material based on a gypsum matrix incorporating waste brick 2020
- The effect of surface treatment and environmental actions on the adhesive connection between GFRP laminate surface and fresh FRC 2020
- Hydraulic lime mortars incorporating micro cork granules with antifungal properties 2020
- Behavior of one-way RC slabs flexurally strengthened with prestressed NSM CFRP laminates – Assessment of influencing parameters 2020
- Bond behaviour of NSM CFRP laminate strip systems in concrete using stiff and flexible adhesives 2020
- Flexural behaviour of NSM CFRP laminate strip systems in concrete using stiff and flexible adhesives 2020
- Practice on creating a common reference concrete for Round Robin Testing programmes based on the experience from COST Action TU1404 2020
- Additive manufacturing effect on the mechanical behaviour of architectural stoneware bricks 2020
- Deformation analysis of fibre-reinforced polymer reinforced concrete beams by tension-stiffening approach 2020
- Silica nanoparticles surface charge modulation of the electroactive phase content and physical-chemical properties of poly(vinylidene fluoride) nanocomposites 2020
- A fast modeling approach for numerical analysis of unreinforced and FRCM reinforced masonry walls under out-of-plane loading 2020
- Assessment of GFRP bond behaviour for the design of sustainable reinforced seawater concrete structures 2020
- Behavior of cementitious mortars with direct incorporation of non-encapsulated phase change material after severe temperature exposure 2020
- Hybrid effect of basalt fiber textile and macro polypropylene fiber on flexural load-bearing capacity and toughness of two-way concrete slabs 2020
- Influence of transcrystalline layer on finite element mesoscale modeling of polyamide 6 based single polymer laminate composites 2020
- Physical and mechanical characterization of vernacular dry stone heritage materials: Schist and granite from Northwest Portugal 2020
- Spray-printed magnetoelectric multifunctional composites 2020
- Sustainable polymer-based Phase Change Materials for energy efficiency in buildings and their application in aerial lime mortars 2020
- Topographical analysis of fractured surface roughness of macro fiber reinforced concrete and its correlation with flexural toughness 2020
- Hygro-mechanical modeling of restrained ring test: COST TU1404 benchmark 2019
- Magnetic ionic liquid/polymer composites: Tailoring physico-chemical properties by ionic liquid content and solvent evaporation temperature 2019
- Quantification of impact of lime on mechanical behaviour of lime cement blended mortars for bedding joints in masonry systems 2019
- Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam 2019
- Influence of the incorporation of phase change materials on temperature development in mortar at early ages: Experiments and numerical simulation 2019
- Effect of temperature on the fracture toughness of wood under mode I quasi-static loading 2019
- Experimental and numerical analyses of wood boards joining using wood-pin connectors 2019
- Micromechanical finite element parametric study of polyamide 6 based single polymer composites reinforced by woven textile structures 2019
- Punching CFRP-based strengthening solutions for reinforced concrete flat slabs 2019
- Stiffness evolution of natural hydraulic lime mortars at early ages measured through EMM-ARM 2019
- Structural behaviour and design rules of confined masonry walls: Review and proposals 2019
- Effects of extreme environmental exposure conditions on the mechanical behaviour of traditional carpentry joints 2019
- Mechanical behavior of concrete prisms reinforced with steel and GFRP bar systems 2019
- The effect of prolonged storage time on asphalt rubber binder properties 2019
- Effect of steel fiber and carbon black on the self-sensing ability of concrete cracks under bending 2019
- Experimental analysis of the thermohygrometric effects on the dynamic behavior of adobe systems 2019
- Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites 2019
- Bond behaviour of sand coated GFRP bars to concrete at elevated temperature – Definition of bond vs. slip relations 2019
- A new strengthening technique for increasing the load carrying capacity of rectangular reinforced concrete columns subjected to axial compressive loading 2019
- Enhancement of stiffness and load bearing capacity of damaged mortar beams with CFRP patches 2019
- Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar 2019
- Using waste polymers as a reliable alternative for asphalt binder modification - Performance and morphological assessment 2019
- Assessment of different methods for characterization and simulation of post-cracking behavior of self-compacting steel fiber reinforced concrete 2019
- Experimental study of torsional strengthening on thin walled tubular reinforced concrete structures using NSM-CFRP laminates 2019
- Experimental tests for the characterization of sisal fiber reinforced cementitious matrix for strengthening masonry structures 2019
- Positive, zero and negative Poisson’s ratio non-stochastic metallic cellular solids: dependence between static and dynamic mechanical properties 2019
- Textile-to-mortar bond behaviour in lime-based textile reinforced mortars 2019
- Comparison of the performance of hydraulic lime- and clay-based grouts in the repair of rammed earth 2018
- Concrete with fine and coarse recycled aggregates: E-modulus evolution, compressive strength and non-destructive testing at early ages 2018
- Microstructural-mechanical properties relationship in single polymer laminate composites based on polyamide 6 2018
- Modal analysis of historical masonry structures: Linear perturbation and software benchmarking 2018
- Multifunctional magnetically responsive biocomposites based on genetically engineered silk-elastin-like protein 2018
- Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for Externally Bonded Reinforcement 2018
- Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression 2018
- Out-of-plane behavior of stone masonry walls: Experimental and numerical analysis 2018
- Fracture behavior of wood-steel dowel joints under quasi-static loading 2018
- TiO 2 /graphene and TiO 2 /graphene oxide nanocomposites for photocatalytic applications: A computer modeling and experimental study 2018
- COST TU1404 benchmark on macroscopic modelling of concrete and concrete structures at early age: Proof-of-concept stage 2018
- Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications 2018
- Designing NSM FRP systems in concrete using partial safety factors 2018
- Dimensional optimization of carbon-epoxy bars for reinforcement of wood beams 2018
- Durability of bond in NSM CFRP-concrete systems under different environmental conditions 2018
-
Improved electrochemical performance of rare earth doped LiMn
1.5-x Ni0.5 REx O4 based composite cathodes for lithium-ion batteries 2018 - Relation between fiber orientation and mechanical properties of nano-engineered poly(vinylidene fluoride) electrospun composite fiber mats 2018
- Assessment of photocatalytic, superhydrophobic and self-cleaning properties on hot mix asphalts coated with TiO 2 and/or ZnO aqueous solutions 2018
- Behavior of RC beams flexurally strengthened with NSM CFRP laminates 2018
- Bond behavior of NSM CFRP laminates in concrete under sustained loading 2018
- Carbon dioxide sequestration of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibres 2018
- Developing enhanced modified bitumens with waste engine oil products combined with polymers 2018
- Effect of multiscale reinforcement on the mechanical properties and microstructure of microcrystalline cellulose-carbon nanotube reinforced cementitious composites 2018
- Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: Experimental and analytical modeling 2018
- Effect of the calcinations temperatures of phosphate washing waste on the structural and mechanical properties of geopolymeric mortar 2018
- Experimental results on mechanical behaviour of metal anchors in historic stone masonry 2018
- Fiber-to-mortar bond behavior in TRM composites: Effect of embedded length and fiber configuration 2018
- Integrating geomatic approaches, Operational Modal Analysis, advanced numerical and updating methods to evaluate the current safety conditions of the historical Bôco Bridge 2018
- Poly(vinylidene fluoride) composites with carbon nanotubes decorated with metal nanoparticles 2018
- Pull-out behaviour of Glass-Fibre Reinforced Polymer perforated plate connectors embedded in concrete. Part I: Experimental program 2018
- Quantitative analysis of macro steel fiber influence on crack geometry and water permeability of concrete 2018
- Recycled stone mastic asphalt mixtures incorporating high rates of waste materials 2018
- Short sisal fiber reinforced recycled concrete block for one-way precast concrete slabs 2018
- Silk fibroin-magnetic hybrid composite electrospun fibers for tissue engineering applications 2018
- Stretchable scintillator composites for indirect X-ray detectors 2018
- Experimental and numerical investigations on the flexural performance of geopolymers reinforced with short hybrid polymeric fibres 2017
- Durability of RC slabs strengthened with prestressed CFRP laminate strips under different environmental and loading conditions 2017
- Experimental analysis of the carbonation and humidity diffusion processes in aerial lime mortar 2017
- Suitability of different foamed bitumens for warm mix asphalts with increasing recycling rates 2017
- Viscoelastic response of an epoxy adhesive for construction since its early ages: Experiments and modelling 2017
- Numerical simulation of the flexural behaviour of composite glass-GFRP beams using smeared crack models 2017
- Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation 2017
- Analysis of the effect of shoring on the behaviour of reinforced concrete slabs 2017
- Assessment of the density and moisture content of asphalt mixtures of road pavements 2017
- Bond strength characterization of commercially available grouts for masonry 2017
- Compressive strength prediction of CFRP confined concrete using data mining techniques 2017
- Development of water-based printable piezoresistive sensors for large strain applications 2017
- Effect of synergistic environmental conditions on thermal properties of a cold curing epoxy resin 2017
- Flexural performance of innovative hybrid sandwich panels with special focus on the shear connection behavior 2017
- Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate 2017
- ICEBs stabilised with alkali-activated fly ash as a renewed approach for green building: Exploitation of the masonry mechanical performance 2017
- Influence of fibre reinforcement on the post-cracking behaviour of a cement-stabilised sandy-clay subjected to indirect tensile stress 2017
- Laboratory observation of cracks in road pavements with GPR 2017
- Magnetoelectric response on Terfenol-D/ P(VDF-TrFE) two-phase composites 2017
- NSM shear strengthening technique with CFRP laminates applied in high T cross section RC beams 2017
- Nanodiamonds/poly(vinylidene fluoride) composites for tissue engineering applications 2017
- Performance assessment of basalt FRCM for retrofit applications on masonry 2017
- Prediction of the load carrying capacity of elevated steel fibre reinforced concrete slabs 2017
- Shear strengthening of damaged reinforced concrete beams with hybrid composite plates 2017
- Simultaneous flexural and punching strengthening of RC slabs according to a new hybrid technique using U-shape CFRP laminates 2017
- Strength, behavior, and failure mode of hollow concrete masonry constructed with mortars of different strengths 2017
- Validation of the repair effectiveness of clay-based grout injections by lateral load testing of an adobe model building 2017
- Influence of adding phase change materials on the physical and mechanical properties of cement mortars 2016
- Using data mining algorithms to predict the bond strength of NSM FRP systems in concrete 2016
- Development of a composite prototype with GFRP profiles and sandwich panels used as a floor module of an emergency house 2016
- Effect of fiber dosage and prestress level on shear behavior of hybrid GFRP-steel reinforced concrete I-shape beams without stirrups 2016
- Fracture-based interface model for NSM FRP systems in concrete 2016
- Thermal performance and cost analysis of mortars made with PCM and different binders 2016
- Mechanical performance of cold-curing epoxy adhesives after different mixing and curing procedures 2016
- Optimization of filler type within poly(vinylidene fluoride-co-trifluoroethylene) composite separator membranes for improved lithium-ion battery performance 2016
- Piezoresistive response of spray-printed carbon nanotube/poly(vinylidene fluoride) composites 2016
- Rheological characterization of EVA and HDPE polymer modified bitumens under large deformation at 20 °C 2016
- Experimental analysis of Maritime pine and Iroko single shear dowel-type connections 2016
- Strong increase of the dielectric response of carbon nanotube/poly(vinylidene fluoride) composites induced by carbon nanotube type and pre-treatment 2016
- Increasing X-ray to visible transduction performance of Gd2O3:Eu3+PVDF composites by PPO/POPOP addition 2016
- Shear resistance of SFRSCC short-span beams without transversal reinforcements 2016
- Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure 2016
- Effects of different environmental conditions on the mechanical characteristics of a structural epoxy 2016
- Influence of temperature on the curing of an epoxy adhesive and its influence on bond behaviour of NSM-CFRP systems 2016
- A multidisciplinary approach to assess the health state of heritage structures: The case study of the Church of Monastery of Jerónimos in Lisbon 2016
- A review on the mechanical properties of aged wood and salvaged timber 2016
- A two-phase material approach to model steel fibre reinforced self-compacting concrete in panels 2016
- Assessment of the properties to characterize the interface between clay brick substrate and strengthening mortar 2016
- Characterization of concrete surface in relation to graffiti protection coatings 2016
- Development and characterization of novel auxetic structures based on re-entrant hexagon design produced from braided composites 2016
- Development of innovative hybrid sandwich panel slabs: Advanced numerical simulations and parametric studies 2016
- Effectiveness of the repair of unstabilised rammed earth with injection of mud grouts 2016
- Experimental and numerical research on the potentialities of layered reinforcement configuration of continuous sisal fibers for thin mortar panels 2016
- Experimental characterization of commercial lime based grouts for stone masonry consolidation 2016
- Exploring new NSM reinforcements for the flexural strengthening of RC beams: experimental and numerical research 2016
- FRP-brick masonry bond degradation under hygrothermal conditions 2016
- Fibre reinforced mortar application for out-of-plane strengthening of schist walls 2016
- Flexural strengthening of reinforced low strength concrete slabs using prestressed NSM CFRP laminates 2016
- Influence of different fibers on the change of pore pressure of self-consolidating concrete exposed to fire 2016
- Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials 2016
- Moisture-induced degradation of interfacial bond in FRP-strengthened masonry 2016
- Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures 2016
- Pultrusion of fibre reinforced thermoplastic pre-impregnated materials 2016
- Quantitative and qualitative assessment of the amorphous phase of a Class F fly ash dissolved during alkali activation reactions – Effect of mechanical activation, solution concentration and temperature 2016
- RC beams strengthened in shear using the Embedded Through-Section technique: experimental results and analytical formulation 2016
- Reliability-based assessment of existing masonry arch railway bridges 2016
- Tension-stiffening model for FRC reinforced by hybrid FRP and steel bars 2016
- The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber 2016
- Self-monitoring of freeze-thaw damage using triphasic electric conductive concrete 2015
- State of the art and open questions on cathode preparation based on carbon coated lithium iron phosphate 2015
- Effect of temperature on mortars with incorporation of phase change materials 2015
- Flexural behaviour of RC slabs strengthened with prestressed CFRP strips using different anchorage systems 2015
- Recycled asphalt mixtures produced with high percentage of different waste materials 2015
- Energy harvesting performance of BaTiO3/poly(vinylidene fluoride-trifluoroethylene) spin coated nanocomposites 2015
- Mix design, properties and cost analysis of fly ash-based geopolymer foam 2015
- A FEM-based model to study the behaviour of corroded RC beams shear repaired by NSM CFRP rods technique 2015
- A review on the bond behavior of FRP NSM systems in concrete 2015
- A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms 2015
- Analysis and strengthening of carpentry joints 2015
- Analytical approach for the flexural analysis of RC beams strengthened with prestressed CFRP 2015
- Application of near surface mounted (NSM) strengthening technique to traditional timber frame walls 2015
- Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems 2015
- Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test 2015
- Assessment of the efficiency of prefabricated hybrid composite plates (HCPs) for retrofitting of damaged interior RC beam-column joints 2015
- Development of innovative hybrid sandwich panel slabs: Experimental results 2015
- Effect of wet-dry cycles on the bond behaviour of concrete elements strengthened with NSM CFRP laminate strips 2015
- Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups 2015
- Evaluation of the bond performance in FRP-brick components re-bonded after initial delamination 2015
- Experimental and numerical approaches for structural assessment in new footbridge designs (SFRSCC-GFPR hybrid structure) 2015
- Experimental assessment of an innovative strengthening material for brick masonry infills 2015
- Experimental study and prediction model for flexural behavior of reinforced SCC beam containing steel fibers 2015
- Flexural strengthening of RC beams using hybrid composite plate (HCP): experimental and analytical study 2015
- High performance fiber reinforced concrete for the shear reinforcement: Experimental and numerical research 2015
- Influence of casting condition on the anisotropy of the fracture properties of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC) 2015
- Mechanical characterisation of dry-stack masonry made of CEBs stabilised with alkaline activation 2015
- Mechanical performance of natural fiber-reinforced composites for the strengthening of masonry 2015
- Onsite assessment of structural timber members by means of hierarchical models and probabilistic methods 2015
- Quality control and monitoring of NSM CFRP systems: E-modulus evolution of epoxy adhesive and its relation to the pull-out force 2015
- Recycled steel fibre reinforced concrete failing in bending and in shear 2015
- Retrofitting of interior RC beam-column joints using CFRP strengthened SHCC: Cast-in-place solution 2015
- Transfer Zone of Prestressed CFRP Reinforcement Applied According to NSM Technique for Strengthening of RC Structures 2015
- Using polymers to improve the rutting resistance of asphalt concrete 2015
- Functionalized cork-polymer composites (CPC) by reactive extrusion using suberin and lignin from cork as coupling agents 2014
- Assessment of curved FRP-reinforced masonry prisms: Experiments and modeling 2014
- Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling 2014
- Definition of interaction curves for the in-plane and out-of-plane capacity in brick masonry walls 2014
- Dimensional variation of three softwood due to hygroscopic behavior 2014
- Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020 2014
- Effect of carbon nanotube type and functionalization on the electrical, thermal, mechanical and electromechanical properties of carbon nanotube/styrene-butadiene-styrene composites for large strain sensor applications 2014
- Effectiveness of prestressed NSM CFRP laminates for the flexural strengthening of RC slabs 2014
- Electrospun styrene-butadiene-styrene elastomer copolymers for tissue engineering applications: Effect of butadiene/styrene ratio, block structure, hydrogenation and carbon nanotube loading on physical properties and cytotoxicity 2014
- Experimental characterization of physical and mechanical properties of schist from Portugal 2014
- Extruded thermoplastic elastomers styrene-butadiene-styrene/carbon nanotubes composites for strain sensor applications 2014
- Fibres for enhancing of the bond capacity between GFRP rebar and concrete 2014
- Numerical modelling and parametric analysis of bond strength of masonry members retrofitted with FRP 2014
- Polypropylene-based cork-polymer composites: Processing parameters and properties 2014
- Recycling of manganese gangue materials from waste-dumps in the Iberian Pyrite Belt : application as filler for concrete production 2014
- Static, dynamic and creep behaviour of a full-scale GFRP-SFRSCC hybrid footbridge 2014
- The combination of geomatic approaches and operational modal analysis to improve calibration of finite element models: a case of study in Saint Torcato church (Guimarães, Portugal) 2014
- Carbonation of surface protected concrete 2013
- Proposal of an innovative solution for partition walls : mechanical, thermal and acoustic validation 2013
- Biotech cementitious materials : some aspects of an innovative approach for concrete with enhanced durability 2013
- A model for the prediction of the punching resistance of steel fibre reinforced concrete slabs centrically loaded 2013
- Application of digital image correlation in investigating the bond between FRP and masonry 2013
- Assessment of nonlinear bond laws for near-surface-mounted systems in concrete elements 2013
- Assessment of the digestion time of asphalt rubber binder based on microscopy analysis 2013
- Bond between glulam and NSM CFRP laminates 2013
- Capacity interaction in brick masonry under simultaneous in-plane and out-of-plane loads 2013
- Design formula to evaluate the NSM FRP strips shear strength contribution to a RC beam 2013
- Development of photocatalytic asphalt mixtures by the deposition and volumetric incorporation of TiO2 nanoparticles 2013
- Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests 2013
- Durability of steel fiber reinforced self-compacting concrete 2013
- Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete 2013
- Hybrid cork-polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction 2013
- Mechanical performance of asphalt mixtures produced with cork or rubber granulates as aggregate partial substitutes 2013
- Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam 2013
- Numerical calibration of bond law for GFRP bars embedded in steel fibre-reinforced self-compacting concrete 2013
- Numerical modelling of non-confined and confined masonry walls 2013
- Numerical study of the role of mortar joints in the bond behavior of FRP-strengthened masonry 2013
- Rammed earth construction with granitic residual soils : the case study of northern Portugal 2013
- Render reinforced with textile threads 2013
- Rheological characteristics of EVA modified bitumen and their correlations with bitumen concrete properties 2013
- Rheological properties of alkaline activated fly ash used in jet grouting applications 2013
- Shear strengthening of RC beams with NSM CFRP laminates : experimental research and analytical formulation 2013
- Strain hardening fiber reinforced cement composites for the flexural strengthening of masonry elements of ancient structures 2013
- Targeting HPC with the help of nanoparticles : an overview 2013
- The future of construction materials research and the seventh UN Millennium. Development Goa l: a few insights 2013
- Water degrading effects on the bond behavior in FRP-strengthened masonry 2013
- Mutual changes in bitumen and rubber related to the production of asphalt rubber binders 2012
- The role of a surfactant based additive on the production of recycled warm mix asphalts - Less is more 2012
- An overview on the potential of geopolymers for concrete infrastructure rehabilitation 2012
- Are geopolymers more suitable than Portland cement to produce high volume recycled aggregates HPC? 2012
- An overview on concrete carbonation in the context of eco-efficient 2012
- Bond behavior between glulam and GFRP's by pullout tests 2012
- Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): an overview 2012
- Some considerations about the use of lime-cement mortars for building conservation purposes in Portugal : a reprehensible option or a lesser evil? 2012
- A parametric study on the effectiveness of the NSM technique for the flexural strengthening of continuous RC slabs 2012
- A semi-destructive tension method for evaluating the strength and stiffness of clear wood zones of structural timber elements in-service 2012
- Corn cob lightweight concrete for non-structural applications 2012
- Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue? 2012
- Earth construction: lessons from the past for future eco-efficient construction 2012
- Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading 2012
- Experimental analysis of reinforced concrete block masonry spandrels using pre-fabricated planar trussed bars 2012
- Influence of shrinkage reducing admixtures on distinct SCC mix compositions 2012
- Modelling the compressive mechanical behaviour of granite and sandstone historical building stones 2012
- NSM shear strengthening technique with CFRP laminates applied in high-strength concrete beams with or without pre-cracking 2012
- Properties and durability of HPC with tyre rubber wastes 2012
- Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory 2012
- Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction 2012
- Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature 2012
- Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete 2011
- Deposition of particles on gypsum-rich coatings of historic buildings in urban and rural environments 2011
- Concrete retrofitting using metakaolin geopolymer mortars and CFRP 2011
- Composition, strength and workability of alkali-activated metakaolin based mortars 2011
- Experimental investigation on the mechanical behaviour of the fiber reinforced high-performance concrete tunnel segment 2011
- A design model for strain-softening and strain-hardening fiber reinforced elements reinforced longitudinally with steel and FRP bars 2011
- Application of data mining techniques in the estimation of the uniaxial compressive strength of jet grouting columns over time 2011
- Buildings’ envelope anomalies : a visual survey methodology 2011
- Cementitious building materials reinforced with vegetable fibres : a review 2011
- Crack constitutive model for the prediction of punching failure modes of fiber reinforced concrete laminar structures 2011
- Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck 2011
- Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars 2011
- Nanotechnology: advantages and drawbacks in the field of construction and building materials 2011
- Properties of new cork-polymer composites: Advantages and drawbacks as compared with commercially available fibreboard materials 2011
- Shear capacity assessment of tuff panels strengthened with FRP diagonal layout 2011
- Thermography as a technique for monitoring early age temperatures of hardening concrete 2011
- Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents 2010
- Structural analysis of two King-post timber trusses: Non-destructive evaluation and load-carrying tests 2010
- High CNT content composites with CNT Buckypaper and epoxy resin matrix: Impregnation behaviour composite production and characterization 2010
- Reinforced brick masonry light vaults: Semi-prefabrication, construction, testing and numerical modeling 2010
- Vertically perforated clay brick masonry for loadbearing and non-loadbearing masonry walls 2010
- Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes 2009
- Evaluating permanent deformation in asphalt rubber mixtures 2009
- Experimental characterization of stone masonry in shear and compression 2009
- Numerical model for CFRP confined concrete elements subject to monotonic and cyclic loadings 2009
- The investigation on strength and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete 2009
- Tungsten mine waste geopolymeric binder: preliminary hydration products investigations 2009
- Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substance surface treatment 2008
- Alkali-activated binders: a review part 1. Historical background, terminology, reaction mechanisms and hydration products 2008
- Alkali-activated binders: a review: part 2. About materials and binders manufacture 2008
- Investigations of tungsten mine waste geopolymeric binder: strength and microstructure 2008
- Investigations on mix design of tungsten mine waste geopolymeric binder 2008
- Properties of tungsten mine waste geopolymeric binder 2008
- The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete 2008
- Chestnut wood in compression perpendicular to the grain: Non-destructive correlations for test results in new and old wood 2007
- Assessing the effectiveness of embedding CFRP laminates in the near surface for structural strengthening 2006
- Recommendations for restoration of ancient buildings and the survival of a masonry chimney 2006
- Simplified indexes for the seismic vulnerability of ancient masonry buildings 2006
- Assessment, diagnosis and strengthening of Outeiro Church, Portugal 2005
- Crystallization behaviour of new poly(tetramethyleneterephthalamide) nanocomposites containing SiO2 fillers with distinct morphologies 2005
- The effect of concrete strength and reinforcement on toughness of reinforced concrete beams 2005
- Shear testing of stack bonded masonry 2004
- Durability of polymeric pipes in contact with domestic products 1999
- Effects of long-term exposure of NSM CFRP-to-concrete bond to natural and accelerated aging environments. 340. 2024
- A novel design model for predicting the shear resistance of reinforced concrete beams strengthened with EBR-CFRP systems. 331:117901. 2024
- Design-oriented stress–strain model for RC columns with dual FRP- steel confinement mechanism. 330:117821. 2024
- A new model for predicting the shear strength of RC beams strengthened with externally bonded FRP sheets. 319:117081. 2023
- Influence of matrix recrystallization and nanofiller porosity on the interfacial properties of holey graphene-aluminium nanocomposites. 312:116856. 2023
- Influence of the strain hardening behaviour on the tensile and compressive response of aluminium auxetic structures. 305:116472-116472. 2023
- Time-dependent deflections evaluation in cast-in-place balanced cantilever bridges. 28:487-495. 2021
- A micro-modeling approach for the prediction of TRM bond performance on curved masonry substrates 2021
- Sandwich panels under interfacial debonding mechanisms. 203:310-320. 2018
- On the mechanical properties of monolithic and laminated nano-ceramic resin structures obtained by laser printing. 141:76-83. 2018
- TiO2/graphene and TiO2/graphene oxide nanocomposites for photocatalytic applications: A computer modeling and experimental study. 145:39 - 46. 2018
-
High temperature damping behavior and dynamic Young's modulus of AlSi-CNT-SiC
p hybrid composite. 141:155-162. 2016 - Interface analysis on an eutectic AlSi alloy reinforced with Ni coated MWCNT. 93:229-235. 2016
- Damping capacity and dynamic modulus of hot pressed AlSi composites reinforced with different SiC particle sized. 90:399-405. 2016
- Mechanisms governing the mechanical behavior of an AlSi-CNTs-SiCp hybrid composite. 90:443-449. 2016
- High temperature damping behavior and dynamic Young’s modulus of AlSi-CNT-SiCp hybrid composite 2016
- Bilinear approximations to the mixed-mode I-II delamination cohesive law using an inverse method. 122:361-366. 2015
- Hybrid composites - Metallic and ceramic reinforcements influence on mechanical and wear behavior. 74:153-165. 2015
- Hybrid composites – Metallic and ceramic reinforcements influence on mechanical and wear behavior. 74:153 - 165. 2015
- Interface analysis and wear behavior of Ni particulate reinforced aluminum-silicon composites produced by PM. 69:101-110. 2015
- Mode II fracture characterization of a hybrid cork/carbon-epoxy laminate. 76:44-51. 2015
- Mode I fracture characterization of a hybrid cork and carbon–epoxy laminate. 112:248-253. 2014
- A molecular dynamics study on the thickness and post-critical strength of carbon nanotubes. 94:1352-1358. 2012
- Development of a pedestrian bridge with GFRP profiles and fibre reinforced self-compacting concrete deck. 1-10. 2011
- Special Issue Masonry Research and Practice. 25:4307-4307. 2011
- Structural masonry and earthquakes. 20:199-199. 2006
- Structural damage identification in laminated structures using FRF data. 67:239-249. 2005
- Structural damage identification: Influence of model incompleteness and errors. 62:303-313. 2003