Local de publicação venue para
- Structural characterization of lead metaniobate thin films deposited by pulsed laser ablation 2006
- Emulsion crosslinking as a new manufacturing route to produce hydroxylapatite particulates in a network of starch 2001
- Identification of Waste Potential from Maritime Activity - Incorporating Polyethylene Cables into Building Construction. 1116:131-138. 2024
- Circular Economy: Upcycling Wood Byproducts from the Azores into Building Insulation Material 2023
- Cellulosic Textile Materials Functionalization with Formic Acid and Improvement of their Properties. 1092:75-91. 2023
- Assessing the Accuracy of Different Remapping Methods in Adaptive Mesh Refinement 2022
- Influence of the Anisotropic Behavior on Equibiaxial Paths 2022
- Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials 2022
- On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials 2022
- Development of Antimicrobial Polyester Fabric by a Green In Situ Synthesis of Copper Nanoparticles Mediated from Chitosan and Ascorbic Acid. 83-90. 2022
- Enhancing the Antimicrobial Efficacy of Polyester Fabric Impregnated with Silver Nanoparticles Using DBD Plasma Treatment. 1063:91-97. 2022
- Exploring Nanofibers and Hydrogels as Collagenase Carriers for the Development of Advanced Wound Dressings. 1063:43-55. 2022
- Polyester-Polyvinylalcohol Hydrophilization Strategies. 1063:173-180. 2022
- Substrate Color Prediction through Active Monitoring of the Exhaustion Dyeing Process. 1063:195-201. 2022
- Tensile Behavior of Textile-Reinforced Mortar: Influence of the Number of Layers and their Arrangement. 916:91-97. 2022
- The Potential of Beeswax Colloidal Emulsion/Films for Hydrophobization of Natural Fibers Prior to NTRM Manufacturing. 916:82-90. 2022
- Preliminary Results on Natural Aging of GFRP-Reinforced Masonry Components Exposed to Outdoor Environmental Conditions. 916:11-18. 2022
- Development of Chitosan-Gelatin Nanofibers with Cellulose Nanocrystals for Skin Protection Applications. 893:45-55. 2021
- Improvement of Biocomposite Performance under Low-Velocity Impact Test - A Review. 893:67-74. 2021
- Experimental Shear Behaviour of Rammed Earth Strengthened with a TRM-Based Compatible Technique. 817:544-551. 2019
- Chemical and Biological Warfare Protection and Self-Decontaminating Flax Fabrics Based on CaO Nanoparticles. 812:75-83. 2019
- Performance of Structural Blast Mitigation Measure for Oil and Gas Industrial Facilities 2019
- Smart and Sustainable Materials for Military Applications Based on Natural Fibres and Silver Nanoparticles. 812:66-74. 2019
- Chemical and Biological Warfare Protection and Self-Decontaminating Flax Fabrics Based on CaO Nanoparticles. 812:75-83. 2019
- Longitudinal and Transversal Behavior of Multifilamente Yarn Subjected to Longitudinal Load Using Image Analysis. 812:134-140. 2019
- Novel Multi-scale Cimentitious Composites Developed Using Microcrystalline Cellulose (MCC) and Sisal Fibers. 812:100-106. 2019
- Several Comments on Bearing Capacities of Selected Parts of Enclosure Walls from the Broumov Region. 808:15-26. 2019
- Smart and sustainable materials for military applications based on natural fibres and silver nanoparticles. 812:66-74. 2019
- The Thermal Colour and the Emissivity of Printed Pigments on Knitted Fabrics for Application in Diurnal Thermal Camouflage Garments. 812:127-133. 2019
- Lead (II) Removal from Contaminated Soils by Electrokinetic Remediation Coupled with Modified Eggshell Waste. 777:256-261. 2018
- Characterization of a Compatible Low Cost Strengthening Solution Based on the TRM Technique for Rammed Earth. 747:150-157. 2017
- Assessing Viscoelastic Properties of Concrete during its Early Ages through Forced Dynamic Excitation of Test Beams. 711:103-110. 2016
- Methodology for Analysis of the Reactivity of Coal Fly Ash Using Selective Dissolution by Hydrofluoric Acid. 711:1126-1133. 2016
- Corrosion and Tribocorrosion Behavior of Ti-Alumina Composites. 704:28-37. 2016
- Ternary Blended Cementitious Matrix for Vegetable Fiber Reinforced Composites. 668:3-10. 2016
- Study of the Potential Employment of Malvaceae Species in Composites Materials. 668:75-85. 2015
- Ancient materials and techniques to improve the earthen building durability. 634:357-366. 2015
- Carbonation Resistance of High Volume Fly Ash Concrete. 634:288-299. 2015
- Carbonation front progress in mortars containing fly ash considering the presence of chloride ions. 634:214-221. 2015
- Acoustical Behavior of Hybrid Composite Sandwich Panels. 634:455-464. 2014
- Durability Performance of Fly Ash Based One-Part Geopolymer Mortars. 634:113-120. 2014
- Durability of Natural Fibers for Geotechnical Engineering. 634:447-454. 2014
- Mortars with Phase Change Materials - Part I: Physical and Mechanical Characterization. 634:22-32. 2014
- Mortars with Phase Change Materials - Part II: Durability Evaluation. 634:33-45. 2014
- Mortars with Phase Change Materials: Contribute to Sustainable Construction. 634:3-13. 2014
- Kinetics comparison of alkali-reactivity tests for aggregates. 506-516. 2014
- Results comparison of alkali-reactivity tests for same aggregates, using a kinetic model. 498-505. 2014
- Silk Fibroin/Nano-CaP Bilayered Scaffolds for Osteochondral Tissue Engineering. 587:245-248. 2014
- Gellan Gum-Based Hydrogel Bilayered Scaffolds for Osteochondral Tissue Engineering. 587:255-260. 2013
- Computer aided design of extrusion dies for complex geometry profiles. 730-732:495-500. 2013
- Development of a Process for Copper Recovering from Galvanic Sludges. 730-732:575-580. 2013
- Effect of the Injection Moulding Processing Conditions on Biopolymers Final Properties. 730-732:20-25. 2013
- Evaluation of the Energetic Valorization Potential of Polymeric and Textile Industrial Wastes. 730-732:592-597. 2013
- Influence of Mesh Discretization on the Prediction of Polymer Flow Behaviour in Microcavities. 730-732:525-530. 2013
- Kinetic Study of Thermal De-Chlorination of PVC-Containing Waste. 730-732:611-616. 2013
- Mechanical behavior of gypsum and cork based composite material. 730-732:361-366. 2013
- Modeling the calibration/cooling stage of complex thermoplastic profiles. 730-732:537-542. 2013
- Morphology Control of Thin P3HT-Si-NCs Composite Films for Hybrid Photovoltaic Cells. 730-732:227-231. 2013
- Nanostructured thin coatings from chitosan and an elastin-like recombinamer with acute stimuli-responsive behavior. 730-732:32-37. 2013
- Natural Fibres as Reinforcement Strategy on Cork-Polymer Composites. 730-732:373-378. 2013
- Solid State Transformations and Equilibrium Crystal Structures of an Au-Cu Alloy with Shape Memory Effect. 730-732:859-864. 2013
- Vanadium oxide thin films synthesized by reactive ion beam sputter deposition: Influence of processing parameters. 730-732:251-256. 2013
- Analysis and Evaluation of shape memory alloy wires behaviour in weft-knitted fabrics. 730-732:709-714. 2012
- Concrete Retrofitting Using CFRP and Geopolymer Mortars. 730-732:427-432. 2012
- Fibre reinforced thermoplastic composite rods. 730-732:331-336. 2012
- Microstructure and Strength of ¿-TiAl Alloy/Inconel 718 Brazed Joints. 730-732:835-840. 2012
- Self-Sensing hybrid composite rod with braided reinforcement for strutural health monitoring. 730-732:379-384. 2012
- Waste fiber reinforced composite materials: Production and Mechanical properties. 730-732:665-670. 2012
- Alternative Feedstocks for Biodiesel Production. 730-732:623-629. 2012
- Technical Aspects of Adsorption Process onto an Innovative Eggshell-Derived Low-Cost Adsorbent. 730-732:648-652. 2012
- Assessment of the flexural behavior of concrete block masonry beams. 636-637:1313-1320. 2011
- Behavior of Membrane Construction Materials under Multi-axial Tensile Loading. 636-637. 2010
- Biodegradable Agar Extracted from Gracilaria Vermiculophylla: Film Properties and Application to Edible Coating. 636-637:739-744. 2010
- Computational study of the influence of polymer/polymer interface formation on bilayer-LED functioning. 636-637:325-+. 2010
- Fiber Bragg Grating Sensors Integrated in Polymeric Foils. 636-637:1548-1554. 2010
- Influence of mineral additions in the inhibition of delayed ettringite formation in cement based materials - A microstructural characterization. 636-637:1272-1279. 2010
- Influence of the geometry of units and of the filling of vertical joints in the compressive and tensile strength of masonry. 636-637:1321-1328. 2010
- Modelling of the Thermal Behaviour of Free Form Extrusion. 636-637:833-839. 2010
- Simulating human physiological response with a thermal manikin testing different non active medical devices. 636-637:36-40. 2010
- Surface Modification on Polyamide 6.6 with Double Barrier Discharge (DBD) Plasma to Optimise Dyeing Process by Direct Dyes. 636-637:846-852. 2010
- Synthesis and characterization of new push-pull anthraquinones bearing an arylthienyl-imidazo conjugation pathway as efficient nonlinear optical chromophores. 636-637:387-391. 2010
- Synthesis and characterization of novel donor-acceptor oligothiophenes as efficient and thermally stable second-order nonlinear optical chromophores. 636-637:380-386. 2010
- The Morphology during Extrusion of PA6/PP Blends in the Presence of Nanoclays. 636-637:840-845. 2010
- Theoretical study of the influence of chemical defects on the molecular properties of semiconducting polymers. 636-637:332-+. 2010
- Waste fibre reinforced ecocomposites. 636-637:1415-1420. 2010
- Biodegradable Polymers Extracted from “Sargaço”: Film Properties and Application to Edible Coating. 587-588:548-552. 2008
- Diffusion Brazing of a ¿-TiAl Alloy Using Tini 67: Microstructural Evolution of the Interface. 587-588:425-429. 2008
- Iron and Chromium Removal from Binary Solutions of Fe(III)/Cr(III) and Fe(III)/Cr(VI) by Biosorbents Supported on Zeolites. 587-588:463-467. 2008
- Melting of PP/PA6 Polymer Blends in Single Screw Extruders – An Experimental Study. 587-588:505-509. 2008
- Mineralization of Chitosan Membrane Using a Double Diffusion System for Bone Related Applications. 587-588:77-81. 2008
- New Eco-Friendly Gypsum Materials for Civil Construction. 587-588:908-912. 2008
- Structural and Magnetic Properties of Nanogranular BaTiO3-CoFe2O4 Thin Films Deposited by Laser Ablation on Si/Pt Substrates. 587-588:303-307. 2008
- ß-PVDF Membranes Induce Cellular Proliferation and Differentiation in Static and Dynamic Conditions. 587-588:72-76. 2008
- 5-arylazo-2,2'-bithiophenes: A novel promising series of NLO chromophores. 587-588:268-272. 2008
- Application of a novel modified electrode based on NaY-encapsulated Co(PAN) complex. 587-588:109-113. 2008
- Bond-slip mechanisms of hooked-end steel fibers in self-compacting concrete. 587-5:877-881. 2008
- Computer simulation of hole distribution in polymeric materials. 587-588:711-715. 2008
- Design and optimisation of a blow moulded container. 587-588:510-514. 2008
- Determination of the optical constants of VO2 and Nb-doped VO2 thin films. 587-588:640-644. 2008
- Dynamic Material Properties of Stainless Steel and Multiphase High Strength Steels. 587-588:941-945. 2008
- Effect of gravity/ vibration/ centrifugal process on mechanical properties of an Al-Si alloy. 587-588:395-399. 2008
- Incremental melting and solidification process/mechanical characterization of functionally graded Al-Si alloys. 587-588:400-404. 2008
- Iron and chromium removal from binary solutions of Fe(III)/Cr(III) and Fe(III)/Cr(VI) by biosorbents supported on zeolites. 587-588:463-467. 2008
- Iron and chromium removal from binary solutions of Fe(III)/Cr(III) and Fe(III)/Cr(VI) by biosorbents supported on zeolites. 587-588:463-467. 2008
- New oligothienyl-imidazo-phenanthroline chromophores for NLO applications. 587-588:263-267. 2008
- New oligothienyl-imidazo-phenanthroline chromophores for NLO applications. 587-588:263-267. 2008
- On the dispersion of carbon nanofibre-based suspensions in simple shear: An experimental study. 587-588:192-196. 2008
- Preparation and properties of novel in-situ composite materials based on polyethylene-polyamide oriented blends. 587-588:515-519. 2008
- Preparation and properties of novel in-situ composite materials based on polyethylene-polyamide oriented blends. 587-588:515-519. 2008
- Preparation of biodegradable materials by reactive extrusion. 587-588:520-524. 2008
- Properties of Gypsum-PCM Based Mortars for Interior Plastering of Construction Systems. 587-588:913-917. 2008
- Reactive DC magnetron sputtering of vanadium oxide thin films. 587-588:343-347. 2008
- Structural and mechanical properties of AZOY thin films deposited on flexible substrates. 587-588:834-838. 2008
- Application of Braided Fibre Reinforced Composite Rods in Concrete Reinforcements. 514-516:1556-1560. 2006
- Assessing the Influence of Heat Treatments on ¿-TiAl Joints. 514-516:1333-1337. 2006
- Development of GF/PP Towpreg Woven Fabrics for Composite Reinforcements. 514-516:1551-1555. 2006
- Dispersion of Carbon Nanotubes in Polycarbonate and Its Effect on the Composite Properties. 514-516:1125-1130. 2006
- Dynamic Vulcanisation of EPDM-Based Thermoplastic Vulcanisates during Extrusion: Effect of Processing Conditions. 514-516:838-842. 2006
- Effect of the Matrix on the 1.5µm Photoluminescence of Er-Doped Silicon Quantum Dots. 514-516:1116-1120. 2006
- Microstructure and Thermal Features of a-Si:H and nc-Si:H Thin Films Produced by Rf Sputtering. 514-516:23-27. 2006
- Modelling of Mixing in Single Screw Extruders. 514-516:1409-1413. 2006
- Multilayer Plug Assisted Thermoforming-Concept and Practical Usefulness. 514-516:1467-1471. 2006
- Application of advanced multiphase steels in crashworthiness structures: Experimental study and constitutive equations. 514-516:579-583. 2006
- Comparative study between natural and artificial zeolites as supports for biosorption systems. 514-516:1294-1298. 2006
- Comparative study between natural and artificial zeolites as supports for biosorption systems. 514-516:1294-1298. 2006
- Encapsulation of Cu(II) purine derivative complexes in NaY zeolite. 514-516:1246-1249. 2006
- Evolutional Friction Law in the Numerical Simulation of the Deep Drawing of a Rail 2006
- Experimental Phase Diagram of the Ternary Bi-Sn-Zn. 514-516:1682-1686. 2006
- Experimental and numerical study in denting resistance of 6111-T4 aluminium alloy. 519-521:889-894. 2006
- Immobilization of hybride tungsten complex in microporous structures. 514-516:1196-1200. 2006
- Improving profile cooling through modelling. 514-516:1429-1433. 2006
- New fluorescent heterocyclic materials: Synthesis, solvatochromic and fluorescence properties. 514-516:147-151. 2006
- Optimization of Deposition Parameters for Thin Silicon Films on Flexible Substrates in a Hot-Wire Chemical Vapor Deposition Reactor. 514-516:475-479. 2006
- Predicting Shrinkage in Semi-Crystalline Injection Mouldings – The Influence of Pressure. 514-516:1501-1505. 2006
- Processing-microstructure-properties relationships in extrusion of thermoplastics. 514-516:833-837. 2006
- Structural characterization of sputtered composite stabilized ZrO 2 thin films. 514-516:1150-1154. 2006
- Structural grades of timber by bending and compression tests. 514-516. 2006
- Study of electrochromic devices incorporating a polymer gel electrolyte component. 514-516:83-87. 2006
- The influence of material density on bipolar charge transport in polymer-based electronic applications. 514-516:882-886. 2006
- Thermoelectric properties of Bi2Te3/Sb 2Te3 thin films. 514-516:156-160. 2006
- Thermoelectric properties of Bi2Te3/Sb 2Te3 thin films. 514-516:156-160. 2006
- Thermoelectric properties of Bi2Te3/Sb 2Te3 thin films. 514-516:156-160. 2006
- Thermogravimetric study of polyethylene catalytic degradation by zeolites. 514-516:901-904. 2006
- {Modelling of Mixing in Single Screw Extruders}. 514:1409-1413. 2006
- Assessment of the Potential of Bonelike Graft for Bone Regeneration by Using an Animal Model. 284-286:877-880. 2005
- Application of Dual-Phase and TRIP steels on the improvement of crashworthy structures. 502:181-186. 2005
- Carboxymethylchitosan/calcium phosphate hybrid materials prepared by an innovative auto-catalytic co-precipitation method. 284-286:701-704. 2005
- Interfacial interactions between liquid new biocompatible model glasses and solid metallic and ceramic substrates used in biomedicine. 284. 2005
- Residual stress effects on Raman spectra of RuO2 thin films. 490-491:583-588. 2005
- Effect of Experimental Conditions on the Grafting of Maleic Anhydride onto Polyethylene in Extruders. 455-456:480-483. 2004
- Effect of the Bi Content on the Mechanical Properties of a Sn-Zn-Al-Bi Solder Alloy. 455-456:307-311. 2004
- Enzymatic Degradation of Starch Based Thermoplastic Compounds Used in Protheses. 455-456:429-432. 2004
- Leaching of Brasses in Long-Term Direct Contact with Water. 455-456:839-843. 2004
- Modelling of the Grafting of Maleic Anhydride onto Polyethylene in an Extruder. 455-456:763-766. 2004
- Effect of Melt Viscosity on the Ejection Force in Injection Moulds. 455-456:755-758. 2004
- Enzymatic degradation of starch based thermoplastic compounds used in protheses. 455-456:429-432. 2004
- Fibrous Reinforcements for composite Materials: Producing and Modelling. 455-456:787-791. 2004
- In vivo behaviour of Bonelike((R))/PLGA hybrid: Histological analysis and peripheral quantitative computed tomography (pQ-CT) evaluation 2004
- Modelling of the Grafting of Maleic Anhydride onto Polyethylene in an Extruder 2004
- Numerical Analysis on the Effects of the Friction Coefficient on the Deep Drawing of a Rail 2004
- Physical properties of sputtered ITO and WO3 thin films. 455-456:7-11. 2004
- Preparation and characterization of a novel polymer electrolyte based on lithium hexafluoroarsenate. 455-456:596-601. 2004
- Preparation of new materials containing diazoalcene molybdenum complexes in pillared clays. 455-456:569-572. 2004
- Spiral inductors on silicon for wireless communications. 455-456:116-119. 2004
- Springback Evaluation with Several Phenomenological Yield Criteria 2004
- Work Hardening Models and the Numerical Simulation of the Deep Drawing Process 2004
- {Modelling of the Grafting of Maleic Anhydride onto Polyethylene in an Extruder}. 455:763-766. 2004
- The Influence of the Processing Temperature on the Microstructure of ¿-TiAl Joints Brazed with a Ti-15Cu-15Ni Alloy. 426-432:4159-4166. 2003
- Tailoring the bioactivity of natural origin inorganic - Polymeric based systems. 240-242:111-142. 2003
- The frequency domain assurance criterion as a tool for damage detection. 245-346:69-76. 2003
- Microstructural Characterisation of ¿-TiAl Joints. 230-232:27-30. 2002
- Polymer Melt Flow through Channels with Vibrating Walls. 230-232:300-302. 2002
- Structural Composite Parts Production from Textile Preforms. 230-232:36-39. 2002
- Atomic force microscopy as a tool to study in-situ the in-vitro bioactivity of starch thermoplastic/hydroxylapatite biomaterials. 218-220:55-60. 2002
- Comparison of Experimental and Simulated Results for a Mild Steel and a Dual-Phase Steel Deformed under Tension and Deep-Drawing 2002
- Gas-sensitive response of SnO2 thin-film sensors produced by reactive DC magnetron sputtering. 230-232:388-391. 2002
- In-situ AFM study of the mechanisms involved on calcium-phosphate film formation on partially crystallized Bioglass® and on hydroxylapatite immersed in a simulated body fluid. 218-220:291-294. 2002
- Influence of elastic properties of substrate and coating on the residual stress distribution of FGM coatings. 230-232:335-338. 2002
- Mechanical and adhesion behaviours of superhard (Ti,Si,Al)N nanocomposite films grown by reactive magnetron sputtering. 230-232:185-188. 2002
- Structural development in hard Si-based TiN coatings as a function of temperature: A comprehensive study in vacuum and in air. 383:151-160. 2002
- Structural development in hard Si-based TiN coatings as a function of temperature: A comprehensive study in vacuum and in air. 383:151-160. 2002
- Superhard Nanocomposite Ti-Si-N Coatings 2002
- Development of highly bioactive and mechanically strong starch thermoplastic/bioglass composite biomaterials. 192-195:705-708. 2001
- Development of highly bioactive and mechanically strong starch thermoplastic/bioglass composite biomaterials. 192-195:705-708. 2001
- Emulsion crosslinking as a new manufacturing route to produce hydroxylapatite particulates in a network of starch. 192-195:243-246. 2001
- Incorporation Feasibility of Leather Residues in Bricks. 206-213:2005-2008. 2001
- Incorporation feasibility of leather residues in bricks. 2005-2008. 2001
- Novel auto-catalytic deposition methodology to produce calcium-phosphate coatings on polymeric biomaterials. 192-195:83-86. 2001
- Novel auto-catalytic deposition methodology to produce calcium-phosphate coatings on polymeric biomaterials. 192-195:83-86. 2001
- Sodium silicate gel induced self-mineralization of different compact and porous polymeric structures. 192-195:75-78. 2001
- Starch based copolymers as biomaterials in vivo biocompatibility study. 192-195:433-436. 2001
- Structure and properties of hydroxylapatite reinforced starch bone-analogue composites. 192-195:669-672. 2001
- Zr bearing ¿-TiAl induction melted. 188:45-54. 2000
- Modelling of thermal residual stresses in graded ceramic coatings. 308-311:930-935. 1999
- Modelling of thermal residual stresses in graded ceramic coatings. 308-311:930-935. 1999
- Analytical modeling of the bond behavior between textile and mortar based on pull-out tests 2019
- Chemical and biological warfare protection and self-decontaminating flax fabrics based on CaO nanoparticles 2019
- Experimental shear behaviour of rammed earth strengthened with a TRM-based compatible technique 2019
- Longitudinal and transversal behavior of multifilament yarn subjected to longitudinal load using image analysis 2019
- Smart and sustainable materials for military applications based on natural fibres and silver nanoparticles 2019
- Textile electrodes for heart rate measurement: A comparative study for firefighters' monitoring 2019
- The thermal colour and the emissivity of printed pigments on knitted fabrics for application in diurnal thermal camouflage garments 2019
- Application of acoustic emission technique for bond characterization in FRP-masonry systems 2015
- Numerical and experimental analysis of full scale arches reinforced with GFRP materials 2015
- Towards "green" smart materials for force and strain sensors: The case of polyaniline 2015
- A study on shrinkage and warpage of rotational moulded polyethylene 2013
- Aluminium evaporation during ceramic crucible induction melting of titanium aluminides 2013
- Assessment of the shrinkage and ejection forces of reinforced polypropylene based on nanoclays and short glass fibre 2013
- Evaluation of functionally graded ceramic crucible for induction melting of TiAl based alloys 2013
- Factors affecting the metal recovery yield during induction melting of aluminium swarf 2013
- Glulam mechanical characterization 2013
- Mechanical behavior of the lamellar structure in semi-crystalline polymers 2013
- Microstructure and strength of ¿-TiAl alloy / Inconel 718 brazed joints 2013
- Modelling the mechanical behavior of polymer-based nanocomposites 2013
- Multi-technique approach for the assessment of historical masonry constructions 2013
- Non-destructive tests for the structural assessment of a historical bridge over the Tua River 2013
- Use of acoustic energy in the processing of molten aluminium alloys 2013
- Biodegradable agar extracted from Gracilaria vermiculophylla: Film properties and application to edible coating 2010
- Development of permeable reactive barrier for phosphorus removal 2010
- Preparation of chitosan scaffolds for tissue engineering using supercritical fluid technology 2010
- Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization 2010
- Synthesis of biodegradable copolymers based on ethylene vinyl acetate and polylactic acid 2010
- The morphology during extrusion of PA6/PP blends in the presence of nanoclays 2010
- Influence of Substrate Temperature and Post-annealing Treatment on the Microstructure and Electric Properties of ZnO:Al Thin Films Deposited by Sputtering 2013
- Key Engineering Materials: Preface 2011
- Development of chitosan-gelatin nanofibers with cellulose nanocrystals for skin protection applications 2021
- Experimental characterization of masonry panels strengthened with NFRCM 2021
- Improvement of biocomposite performance under low-velocity impact test - a review 2021
- Thermal camouflage clothing in diurnal and nocturnal environments 2021
- Novel multi-scale cimentitious composites developed using Microcrystalline Cellulose (MCC) and sisal fibers 2018
- Experimental and numerical investigations on the behaviour of masonry walls reinforced with an innovative sisal FRCM system 2017
- Modelling of the in-plane and out-of-plane performance of TRM-strengthened masonry walls 2017
- Influence of embedded through section connectors on the behavior of a new strengthening technique for concrete structures 2016
- Thermal performance characterization of a modular system for facade 2015
- Acoustical behavior of hybrid composite sandwich panels 2015
- Characterization of parameters to predict the structural behaviour of geopolymeric mortar plates strengthened with carbon fiber reinforced polymer 2015
- Durability of natural fibers for geotechnical engineering 2015
- Durability performance of fly ash based one-part geopolymer mortars 2015
- Eco-efficient self-compacting concrete with reduced Portland cement content and high volume of fly ash and metakaolin 2015
- Effects of anti-graffiti protection on concrete durability 2015
- Mortars with phase change materials - Part I: Physical and mechanical characterization 2015
- Study of the potential employment of Malvaceae Species in composites materials 2015
- Prediction of tensile properties of injection moulding flax fibre reinforced polypropylene from morphology analysis 2013
- Analysis and evaluation of shape memory alloy wires behaviour in weft-knitted fabrics 2013
- Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds 2013
- Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres 2013
- Characterization of epoxy/steel fibres composites for hybrid injection moulds 2013
- Characterization of polypropylene structural foams for large part applications 2013
- Determination of material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion 2013
- Eco-efficient concrete using industrial wastes: a review 2013
- Effect of the acid environment on the electrochemical behaviour of 1045 steel reinforced cement 2013
- Embodied energy versus operational energy. Showing the shortcomings of the energy performance building directive (EPBD) 2013
- Estimating the age of lime mortars by luminescence to measure pollution rates 2013
- Fibre reinforced thermoplastic composite rods 2013
- Influence of graphite and carbon nanotubes on the mechanical and electrical properties of cast epoxy composites 2013
- Mechanical performance of concrete with partial replacement of sand by sewage sludge ash from incineration 2013
- Performance of stones under different conditions : a study of metro stations 2013
- Superhydrophobic to superhydrophylic biomimetic poly(3-hydroxybutyrate) surfaces made by phase inversion 2013
- Phase-morphology and molecular structure correlations in model fullerene-polymer nanocomposites 2012
- Performance assessment of waste fibre-reinforced mortar 2011
- Self-sensing hybrid composite rod with braided reinforcement for strutural health monitoring 2011
- Waste fiber reinforced composite materials: production and mechanical properties 2011
- Improving the dynamical behaviour of a laser cutting equipment by using a carbon fibre composite main structural runway frame 2011
- Production of thermoplastic matrix towpregs for higly demanding and cost - effective commercial applications 2011
- Production of thermoplastic towpregs 2010
- Surface modification on polyamide 6.6 with double barrier discharge (DBD) plasma to optimize dyeing process by direct dyes 2010
- Behaviour of membrane construction materials under multi-axial tensile loading 2009
- Glass/polyvinyl chloride composites 2009
- Computer simulation of hole distribution in polymeric materials 2008
- Interfaces in alfa fibre-polypropylene matrix composites 2008
- 5-Arylazo-2,2´-bithiophenes: a novel promising series of NLO chromophores 2008
- Bond-slip mechanisms of hooked-end steel fibers in self-compacting concrete 2008
- Microstructure characterization of aluminium syntactic functionally graded composites containing hollow ceramic microspheres manufactured by radial centrifugal casting 2008
- Preparation and Properties of Novel In-situ Composite Materials Based on Polyethylene-Polyamide Oriented Blends 2008
- Structural and magnetic properties of nanogranular BaTiO3-CoFe2O4 thin films deposited by laser ablation on Si/Pt substrates 2008
- Biodegradable composites applied to the automotive industry: the development of a loudspeaker front 2008
- Cure and rheological analysis of reinforced resins for stereolithography 2008
- Design and optimisation of a blow moulded container 2008
- Diffusion brazing of a gamma-TiAl Alloy Using Tini 67: microstructural evolution of the interface 2008
- Fibrous reinforcing system to increase the shear resistance of high strength concrete 2008
- Hyperelastic modelling of cork-polyurethane gel composites: non-linear FEA implementation in 3D foot model 2008
- Influence of the crystallization kinetics on the microstructural properties of γ-PVDF 2008
- Iron and chromium removal from binary solutions of Fe(III)/Cr(III) and Fe(III)/Cr(VI) by biosorbents supported on zeolites 2008
- Mechanical and processing characterization of effective behavior of wood-plastic composites by analytical and numerical simulation. 2008
- Melting of PP/PA6 polymer blends in single screw extruders: an experimental study 2008
- Mineralization of chitosan membrane using a double diffusion system for bone related applications 2008
- New eco-friendly gypsum materials for civil construction 2008
- New oligothienyl-imidazo-phenanthroline chromophores for NLO applications 2008
- Preparation of biodegradable materials by reactive extrusion 2008
- Structural and Mechanical Properties of AZOY Thin Films Deposited on Flexible Substrates 2008
- The effect of thermomechanical environment on the shrinkage and warpage in thermoplastic parts 2008
- Influence of molecular weight and cristallinity of poly(L-lactic acid) on the adhesion and proliferation of human osteoblast like cells 2006
- The influence of material density on bipolar charge transport in polymer-based electronic applications 2006
- Application of braided fibre reinforced composite rods in concrete reinforcement 2006
- Assessing the influence of heat treatments on γ-TiAl joints 2006
- Comparative study between natural and artificial zeolites as supports for biosorption systems 2006
- Donor-acceptor substituted thienylpyrrole azo dyes: synthesis, solvatochromic and electrochemical properties 2006
- Effect of poling on the mechanical properties of β-poly(vinylidene fluoride) 2006
- Electrical and microstructural changes of β-PVDF under uniaxial stress studied by scanning force microscopy 2006
- In-situ friction monitoring of self-mated CVD diamond coatings using acoustic emission 2006
- Microstrucure and thermal features a-Si:H and nc-Si:H thin films produced by r.f. sputtering 2006
- Optimization of deposition parameters for thin silicon films on flexible substrates in a hot-wire chemical vapor deposition reactor 2006
- Osteochondral tissue engineering constructs with a cartilage part made of poiy(L-lactic acid) / starch blend and a bioactive poly(L-lactic acid) composite layer for subchondral bone 2006
- Piezoelectric and optical response of uniaxially stretched (VDF/TrFE) (75/25) copolymer films 2006
- Push-pull tricyanovinyl-substituted thienylpyrroles: synthesis, solvatochromic and electrochemical properties 2006
- Separation of the pyro- and piezoelectric response of electroactive polymers for sensor applications 2006
- Study of electrochromic devices incorporating a polymer gel electrolyte component 2006
- α - to - β transformation on PVDF films obtained by uniaxial stretch 2006
- Biomimetic apatite formation on different polymeric microspheres modified with calcium silicate solutions 2006
- Consolidation of glass fiber-polypropylene towpregs by compression moulding 2006
- Development of GF/PP towpreg woven fabrics for composite reinforcements 2006
- Dispersion of carbon nanotubes in polycarbonate and its effect on the composite properties 2006
- Dynamic vulcanisation of EPDM-Based thermoplastic vulcanisates during extrusion : effect of processing conditions 2006
- Effect of the matrix on the 1.5 microm photoluminescence of Er-doped silicon quantum dots 2006
- Formation of bone-like apatite on polymeric surfaces modified with -SO3H groups 2006
- Incorporation of proteins with different isoelectric points into biomimetic Ca-P coatings : a new approach to produce hybrid coatings with tailored properties 2006
- Influence of the interaction potential parameters on the mechanical response of simulated semi-crystalline polymeric materials 2006
- Modelling of mixing in single screw extruders 2006
- Multilayer plug assisted thermoforming : concept and practical usefulness 2006
- Nanostructure evolution during unixial deformation of PET : a simultaneous WAXS and SAXS study using synchrotron radiation 2006
- New fluorescent heterocyclic materials: Synthesis, solvatochromic and fluorescence properties 2006
- Physicochemical characterization of novel chitosan-soy protein/TEOS porous hybrids for tissue engineereing applications 2006
- Predicting shrinkage in semi-crystalline injection mouldings : the influence of pressure 2006
- Structural grades of timber by bending and compression tests 2006
- Study of the fosfosal controlled permeation through glutaraldehyde crosslinked chitosan membranes 2006
- Thermoelectric properties of Bi2Te3/Sb2Te3 thin films 2006
- Thermogravimetric study of polyethylene catalytic degradation by zeolites 2006
- Transient rheological behaviour of PA6/EPM/EPM-g-MA blends 2006
- Evaluation of SiC-particle connectivity in functionally graded Al/SiCp composites by synchrotron radiation holographic microtomography 2005
- Evaluation of corrosion resistance of multi-layered Ti/gass-ceramic interfaces by electrochemical impedance spectroscopy 2005
- Particle distribution and orientation in Al-Al3Zr and Al-Al3Ti FGMs produced by the centrifugal method 2005
- Wear mechanisms in functionally graded aluminium matrix composites: Effect of the presence of an aqueous solution 2005
- Preparation of bioactive coatings on the surface of bioinert polymers through an innovative auto-catalytic electroless route 2005
- Donor-acceptor substituted oligothiophenes: synthesis, spectroscopic and electrochemical properties 2004
- Effect of the Bi content on the mechanical properties of a Sn-Zn-Al-Bi solder alloy 2004
- Joint Ti-47 Al-2Cr-2Nb with a Ti-Ni braze alloy 2004
- Leaching of brasses in long-term direct contact with water 2004
- Microscopical examination: The Impact of different Ionising radiation doses over protective clothing used in the operating theatre 2004
- Preparation and characterization of a novel solid polymer electrolyte based on lithium hexafluoroarsenate 2004
- Tensile properties and fracture of viscose yarn under high speed impact 2004
- Tribocorrosion studies in centrifugally cast al-matrix siCp-reinforced functionally graded composites 2004
- 31P nuclear magnetic resonance and X-ray diffraction study of Na-Sr-phosphate glass-ceramics 2004
- Bonelike/PLGA hybrid materials for bone regeneration: in vivo evaluation 2004
- Characterization of TiAl alloys by secondary Ion mass spectrometry 2004
- Effect of experimental conditions on the grafting of maleic anhydride onto polyethylene in extruders 2004
- Effect of melt viscosity on the ejection force in injection moulds 2004
- Enzymatic degradation of starch based thermoplastic compounds used in protheses 2004
- Modelling of the grafting of maleic anhydride onto polyethylene in an extruder 2004
- Spiral inductors on silicon for wireless communications 2004
- The effect of holding pressure on the shrinkage and birefringence of injection moulded polypropylene plates 2004
- The Influence of the processing temperature on the microstructure of gamma-TiAl joints brazed with a Ti-15Cu-15Ni alloy 2003
- Porous bioactive composites from marine origin based in chitosan and hydroxylapatite particles 2003
- Processing of gammaTiAl, by ceramic crucible induction melting, and pouring in ceramic shells 2003
- Structural composite parts production from textile preforms 2002
- Microstructural characterisation of gamma-TiAl joints 2002
- Polymer Melt Flow Through Channels With Vibrating Walls 2002
- Glass fibre content of PP plates and their properties: part II: tensile mechanical properties 2002
- Glass fibre contents of PP plates and their properties: part I: Shrinkage and changes in time 2002
- Incorporation feasibility of leather residues in bricks 2002
- The production of TiAl by foundry processes 2002
- Zr bearing gama-TiAl induction melted 2000