publicações selecionadas
-
artigo académico
- Concrete Retrofitting Using CFRP and Geopolymer Mortars. Key Engineering Materials. 2012
-
artigo de conferência
- Cost and environmental performance of waste based alkali-activated mortars 2019
- Mechanical properties of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibres summited to accelerated carbonation 2019
- Mechanical strength and freeze-thaw resistance of fly ash alkaline-based mortars containing recycled aggregates summited to accelerated carbonation 2019
- Mechanical performance of fly ash geopolymeric mortars containing phase change materials 2018
- Thermal performance of fly ash geopolymeric mortars containing phase change materials 2018
- Flow performance of hybrid cement based mortars 2017
- Valorisation of industrial wastes on hybrid low embodied carbon cement based mortars 2017
- A proposal on a new curriculum for the smart eco-efficient built environment 2016
- Development of foam one-part geopolymers with enhanced thermal insulation performance and low carbon dioxide emissions. Advanced Materials Research. 2015
- Durability performance of fly ash based one-part geopolymer mortars. Key Engineering Materials. 2015
- Experimental investigation on the composition, mechanical strength and self-cleaning ability of photocatalytic mortars 2015
- Mechanical performance of geopolymeric mortars based on tunisian calcined clay, fly ash and metakaolin 2015
- Performance of a fly ash geopolymeric mortar for coating of ordinary portland cement concrete exposed to harsh chemical environments 2015
- Performance of fly ash-based geopolymer mortar 2015
- Prediction of the compressive strength of one-part geopolymers 2015
- Foam geopolymers: state of the art and preliminary experimental results 2014
- High temperatures behaviour of mortars with incorporation of phase change materials 2014
- Performance of fly ash based one-part geopolymer mortars in durability tests 2014
- Utilização de nano-partículas para a obtenção de betões de elevado desempenho 2014
- Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres. Key Engineering Materials. 2013
- Eco-concrete: one-part geopolymer mixes 2013
- Eco-efficient concrete using industrial wastes: a review. Key Engineering Materials. 2013
- Embodied energy versus operational energy. Showing the shortcomings of the energy performance building directive (EPBD). Key Engineering Materials. 2013
- Mechanical performance of concrete with partial replacement of sand by sewage sludge ash from incineration. Key Engineering Materials. 2013
- One-part geopolymers versus Ordinary Portland Cement (OPC) mortars : durability assessment 2013
- Alguns contributos da nanotecnologia para a sustentabilidade dos materiais de construção 2012
- Desenvolvimento de argamassas para a reabilitação de edificios antigos. Parte 1 – Trabalhabilidade e comportamento mecânico 2012
- Desenvolvimento de argamassas para a reabilitação de edifícios antigos. Parte 2 – Comportamento à água 2012
- Argamassas fotocatalíticas: influência da composição na resistência mecânica e na capacidade de auto-limpeza 2012
- Desenvolvimento de um betão com elevada resistência ao ataque por ácido sulfúrico contendo resíduos de borracha de pneus 2012
- Diphasic conductive concrete with nano materials and carbon fiber for self-sensing of strain 2012
- New pozzanic industrial wastes for eco-efficient concrete 2012
- Preliminary experimental investigation on one-part geopolymer mixes 2012
- Asbestos based materials: new lights for an old problem and worrisome problem 2011
- Highlighting the excellence in civil engineering research in Portugal with the help of the h-index 2011
- The new construction products regulation (CPR) and the shift towards eco-efficient construction 2011
- Using metakaolin to improve the compressive strength and the durability of fly ash based concrete 2011
- Radiochemical indoor environment and public health risks in current building technologies 2011
- Considerations about the use of lime-cement mortars for render conservation purposes 2011
- Mechanical properties and durability of concrete with partial replacement of Portland cement by ceramic wastes 2011
- Tyre rubber wastes based concrete: a review 2011
- Investigation of the effect of fibers on bond properties between self-consolidating concrete and GFRP rebars 2011
- Cementitious composites reinforced with polypropylene, nylon and polyacrylonitile fibres 2011
- Concrete repair with geopolymeric mortars: influence of mortars composition on their workability and mechanical strength 2011
- Concrete retrofitting using CFRP and geopolymer mortars 2011
- Eco-efficient concrete using industrial wastes: a review 2011
- Embodied energy versus operational energy : showing the shortcomings of the energy performance building directive (EPBD) 2011
- Mechanical performance of concrete with partial replacement of sand by sewage sludge ash 2011
- Considerações sobre a sustentabilidade das unidades de alvenaria 2010
- Toxicidade de materiais de construção: uma questão incontornável para a construção sustentável: parte 1: os caso do amianto e das nano partículas 2010
- Toxicidade de materiais de construção: uma questão incontornável para a construção sustentável: parte 3: os casos dos materiais plásticos, colas sintéticas, isolamentos térmicos, tintas, vernizes e produtos para preservação de madeiras 2010
- Toxicidade dos materiais de construção: uma questão incontornável para a construção sustentável: parte 2: o caso dos materiais com contaminação radioactiva e as canalizações em chumbo para abastecimento de água 2010
- Air lime mortars with vegetable fat addition: characteristics and research needs 2010
- Causes of decay of the Aveleiras House decorative plasters (in Torre de Moncorvo) 2010
- Considerações sobre o impulso dos BAC´s no dimensionamento de cofragens verticais 2010
- Capacidade de auto-limpeza de argamassas contendo dióxido de titânio (TiO2) 2010
- Desempenho comparado entre argamassas comerciais para a reabilitação e argamassas de cal aérea e metacaulino 2010
- Argamassas com cal aérea hidratada com incorporação de gorduras: Caracterização e necessidades de investigação 2010
- Improving the resistance to sulphuric acid attack of precast concrete pipes with polymers : technical and economic considerations 2010
- Strength and durability characteristics of polymer-modified carbon fiber concrete 2010
- Ensaios de avaliação da durabilidade das construções em terra 2010
- Betões eco-eficientes com capacidade sensora: estado da arte e necessidades de investigação 2009
- Considerações sobre a sustentabilidade da construção em terra 2009
- Construção em terra : algumas considerações sobre a selecção de solos 2009
- Vegetable fibre reinforced concrete composites: a review 2009
- Considerações acerca da pré-fabricação com betões à base de ligantes geopoliméricos 2008
- Ligantes activados alcalinamente: reactividade de lamas residuais de minas após calcinação 2008
- Ligantes obtidos por activação alcalina de lamas residuais. Microestruturas dos produtos de hidratação 2008
- Some considerations about the durability of historic mortars 2008
- Alkali-activated tungsten mine waste mud binder versus OPC concrete: acid and abrasion resistance 2007
- Tungsten mine waste geopolymeric binder versus ordinary portland cement based concrete: abrasion and acid resistance 2007
- Argamassas antigas: reacção pozolânica ou activação alcalina? 2007
- Argamassas obtidas através da activação alcalina de lamas residuais de minas. Eficiência técnico-económica na reparação de elementos de betão 2007
- Construção sustentável: o caso dos materiais de construção 2007
- Do engineering students need sustainable development courses? 2007
- Estudos sobre a composição de argamassas obtidas através da activação alcalina de lamas residuais de minas 2007
- Evaluation of inorganic polymer as adhesive material for repair of reinforced concrete 2007
- Ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira: parte II: durabilidade e comportamento ambiental 2007
- Ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira: parte III: influência dos agregados na resistência e microestrutura 2007
- Ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira: parte Ι: propriedades físicas e mecânicas 2007
- The Bologna process: what should and should not be done? 2007
- Using mine waste mud to produce environmentally friendly new binders 2007
- Utilização de ligantes obtidos por activação alcalina de lamas de minas para reparação de estruturas de betão 2007
- Bond strength between concrete substance and repair materials: comparisons between tungsten mine waste geopolymeric binder versus current commercial repair products. 2006
- Alkali activated geopolymeric binder using tungesten mine waste: preliminary investigation 2005
- Cimento portland versus ligantes geopliméricos: considerações económicas sobre as Implicações do mercado do carbono no custo do betão 2005
- Contributos para o estudo da composição de ligantes obtidos por activação alcalina de lamas residuais das minas da Panasqueira 2005
- Tendências no desenvolvimento sustentável: investigação sobre o desenvolvimento de ligantes de baixas emissões obtidos a partir de resíduos de minas 2005
- Tratamento térmico das lamas residuais das minas da Panasqueira: influencia do tempo e da temperatura de calcinação 2005
-
artigo de revista
- Cleaner production of the precast concrete industry: comparative life cycle analysis of concrete using recycled aggregates from crushed precast rejects. European Journal of Environmental and Civil Engineering. 2023
- Innovative modeling framework of chloride resistance of recycled aggregate concrete using ensemble-machine-learning methods. Composite Structures. 2022
- Design of fly ash-based alkali-activated mortars, containing waste glass and recycled CDW aggregates, for compressive strength optimization 2022
- Advantages and shortcomings of the utilization of recycled wastes as aggregates in structural concretes. Composite Structures. 2021
- Materiais para arrefecimento de edifícios ajudam a salvar vidas no contexto da recessão económica do COVID-19 2020
- Alkali-activated cement-based binder mortars containing phase change materials (PCMs): mechanical properties and cost analysis. European Journal of Environmental and Civil Engineering. 2020
- Drying shrinkage of fly ash geopolymeric mortars reinforced with polymer hybrid fibres. Construction Materials: Proceedings of the Institution of Civil Engineers. 2020
- Hybrid effect of basalt fiber textile and macro polypropylene fiber on flexural load-bearing capacity and toughness of two-way concrete slabs. Cement & Concrete Composites. 2020
- Effect of steel fiber and carbon black on the self-sensing ability of concrete cracks under bending. Composite Structures. 2019
- Natural volcanic pozzolan-and granulated blast furnace slag-based alkali-activated repair mortar. International Journal of Structural and Civil Engineering Research. 2019
- Alkali-activated binary mortar based on natural volcanic pozzolan for repair applications. Journal of Building Engineering. 2019
- Investigations of geopolymeric mixtures based on phosphate washing waste. Science and Technology of Materials. 2018
- Performance of a fly ash geopolymeric based binder with calcium hydroxide, Portland cement and metakaolin as additives 2018
- Carbon dioxide sequestration of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibres. Composite Structures. 2018
- Performance of waste based alkaline mortars submitted to accelerated carbon dioxide curing. Resources, Conservation and Recycling. 2018
- Shrinkage performance of fly ash alkali-activated cement based binder mortars. Ksce Journal of Civil Engineering. 2018
- Thermal performance of resource-efficient geopolymeric mortars containing phase change materials. Open Construction and Building Technology Journal. 2018
- Experimental and numerical investigations on the flexural performance of geopolymers reinforced with short hybrid polymeric fibres. Composite Structures. 2017
- Short-term compressive strength of fly ash and waste glass alkali-activated cement based binder (AACB) mortars with two biopolymers. Journal of Materials in Civil Engineering. 2017
- Contributos da nanotecnologia e da biotecnologia para a eficiência energética dos edifícios 2017
- High tech startup creation for energy efficient built environment. Food Packaging and Shelf Life. 2017
- Mechanical performance of geopolymeric mortars based on tunisian calcined clay, fly ash and metakaolin. ALITinform. 2016
- Research performance of tenured professors in Portuguese civil engineering departments 2016
- Cost efficiency and resistance to chemical attack of a fly ash geopolymeric mortar versus epoxy resin and acrylic paint coatings. European Journal of Environmental and Civil Engineering. 2016
- An experimental investigation on nano-TiO2 and fly ash based high performance concrete. The Indian Concrete Journal (ICJ). 2016
- Bioactivity enhancement of calcined kaolin geopolymer with CaCl2 treatment. ScienceAsia. 2016
- Hydration products of geopolymeric mortars based on Tunisian clay for repair of concrete structures | Produtos de hidratação em argamassas geopoliméricas à base de argila da Tunísia para reparação de estruturas de concreto. Materials. 2016
- Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications. European Journal of Environmental and Civil Engineering. 2015
- Effect of temperature on mortars with incorporation of phase change materials. Cement & Concrete Composites. 2015
- Mix design, properties and cost analysis of fly ash-based geopolymer foam. Cement & Concrete Composites. 2015
- Apatite formation on calcined kaolin-white Portland cement geopolymer. Journal of Nanoparticle Research. 2015
- Avaliação da produção científica de professores de Departamentos de Engenharia Civil em Universidades Portuguesas 2014
- Comportamento de argamassas com incorporação de materiais de mudança de fase submetidas a elevadas temperaturas 2014
- Betões de elevado desempenho com nano-partículas de TiO2 e cinzas volantes : resistência mecânica, durabilidade e custo. Engenharia Civil. 2014
- Compressive strength and microstructure of hybrid alkaline cements 2014
- Biotechnologies and bioinspired materials for the construction industry : an overview. International Journal of Sustainable Engineering. 2014
- Compressive strength of tungsten mine waste- and metakaolinbased geopolymers. Ceramics International. 2014
- Compressive strength, microstructure and hydration products of hybrid alkaline cements. Materials Research. 2014
- Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020. Composite Structures. 2014
- Fibres for enhancing of the bond capacity between GFRP rebar and concrete. Cement & Concrete Composites. 2014
- Betões com capacidade de auto-reparação: um contributo para a redução de custos de infra-estruturas 2013
- Resíduos de construção e demolição (RCD): enquadramento e breves considerações sobre a localização óptima das estações de reciclagem 2013
- Gás radão: um perigoso contaminante do ar no interior das habitações 2013
- Predicting compressive strength of different geopolymers by artificial neural networks. Ceramics International. 2013
- Biotech cementitious materials : some aspects of an innovative approach for concrete with enhanced durability. Composite Structures. 2013
- Análise de desenvolvimentos no domínio dos materiais de construção auto-reparadores 2013
- Assessment of the durability performance of fiber-cement sheets. Journal of Materials in Civil Engineering. 2013
- Avaliação dos impactos ambientais de materiais de construção : algumas questões de relevo a merecer reflexão 2013
- Breve análise da estratégia da União Europeia (UE) para a eficiência energética do ambiente construído. Ambiente Construído. 2013
- Modeling the compressive strength of geopolymeric binders by gene expression programming-GEP. Expert Systems with Applications. 2013
- Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam. Cement & Concrete Composites. 2013
- Shrinkage and mechanical performance of geopolymeric mortars based on calcined Tunisian clay. Chemistry and Materials Research. 2013
- Targeting HPC with the help of nanoparticles : an overview. Composite Structures. 2013
- The future of construction materials research and the seventh UN Millennium. Development Goa l: a few insights. Composite Structures. 2013
- Materiais bio-inspirados: utilizando a biotecnologia para aumentar a durabilidade do betão 2012
- Breve análise crítica sobre a gestão de RCD em Portugal: desempenho comparado com práticas internacionais 2012
- Materiais contendo fibras de amianto: problemas e soluções 2012
- Utilização de nanopartículas no desenvolvimento de betões de elevado desempenho 2012
- O papel da nanotecnologia no contexto da eficiência energética do parque habitacional 2012
- Indoor radon: an overview on a perennial problem. Building and Environment. 2012
- An overview on the potential of geopolymers for concrete infrastructure rehabilitation. Composite Structures. 2012
- Are geopolymers more suitable than Portland cement to produce high volume recycled aggregates HPC?. Composite Structures. 2012
- Reabilitação de infra-estruturas de betão com ligantes de base geopolimérica 2012
- An overview on concrete carbonation in the context of eco-efficient. Composite Structures. 2012
- Betões geopoliméricos: um material com elevadas potencialidades para o reaproveitamento de agregados reciclados 2012
- Certificação ambiental de materiais e produtos de contrução : relativizando o valor salvífico das ACVs, dos rótulos ecológicos e das EPDs 2012
- Contributos da nanotecnologia para os Nearly Zero Energy Buildings (NZEB) 2012
- Toxicidade dos materiais de construção. Até que ponto são seguros os limites definidos na legislação?. Revista Internacional Construlink: Estruturas e Construções. 2012
- Influence of acrylic fibers geometry on the mechanical performance of fiber-cement composites. Journal of Applied Polymer Science. 2012
- Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): an overview. Composite Structures. 2012
- Some considerations about the use of lime-cement mortars for building conservation purposes in Portugal : a reprehensible option or a lesser evil?. Composite Structures. 2012
- Durability of alkali-activated binders: a clear advantage over Portland cement or an unproven issue?. Composite Structures. 2012
- Earth construction: lessons from the past for future eco-efficient construction. Composite Structures. 2012
- Evaluation of adhesion in polymeric fibre reinforced cementitious composites. International Journal of Adhesion and Adhesives. 2012
- Execução e reparação de infra-estruturas com recurso a betões correntes ou o barato sai caro (em termos económicos e ambientais) 2012
- Mechanical performance and capillary water absorption of sewage sludge ash concrete (SSAC). International Journal of Sustainable Engineering. 2012
- Properties and durability of HPC with tyre rubber wastes. Composite Structures. 2012
- Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory. Composite Structures. 2012
- Sustainable monitoring of concrete structures: strength and durability performance of polymer-modified self-sensing concrete. International Journal of Sustainable Engineering. 2012
- Desempenho de betões com substituição parcial de 20% de cimento Portland por resíduos cerâmicos moídos 2011
- O novo regulamento de produtos da construção (RPC): incentivando a utilização de produtos eco-eficientes 2011
- Durabilidade do betão com polímeros 2011
- Argamassas de cal aérea e metacaulino versus argamassas comerciais pré-preparadas para a reabilitação : parte 2 2011
- Argamassas de cal aérea e metacaulino versus argamassas comerciais pré-preparadas para a reabilitação: parte 1 2011
- Concrete retrofitting using metakaolin geopolymer mortars and CFRP. Cement & Concrete Composites. 2011
- Energia incorporada em materiais de construção versus energia operacional. Revista Internacional Construlink. 2011
- Selecção de materiais de construção eco-eficientes. Parte 2. Arte & Construção. 2011
- Desenvolvimento de argamassas para a reabilitação de edifício antigos : Parte 2 : comportamento á água. 2011
- Selecção de materiais de construção eco-eficientes. Parte 1. Arte & Construção. 2011
- Composition, strength and workability of alkali-activated metakaolin based mortars. Composite Structures. 2011
- Betão eco-eficiente: o futuro da indústria do betão pronto 2011
- Vantagens ambientais da construção em terra 2011
- As “intermitências” da sustentabilidade. Construção Magazine - Revista Técnico-Científica de Engenharia Civil. 2011
- Toxicity of building materials: a key issue in sustainable construction. International Journal of Sustainable Engineering. 2011
- Materiais biomiméticos: materiais de construção inspirados na natureza 2011
- Experimental investigation on the mechanical behaviour of the fiber reinforced high-performance concrete tunnel segment. Composite Structures. 2011
- Desenvolvimento de argamassas para a reabilitação de edifícios antigos. parte 1: trabalhabilidade e comportamento mecânico 2011
- Utilização do índice-h para caracterizar a quantidade e a qualidade da produção científica: o caso da investigação em Engenharia Civil produzida em Universidades Portuguesas. Engenharia Civil. 2011
- Cementitious building materials reinforced with vegetable fibres : a review. Composite Structures. 2011
- Compressive strength and durability properties of ceramic wastes based concrete. Materials and Structures. 2011
- Nanotechnology: advantages and drawbacks in the field of construction and building materials. Composite Structures. 2011
- O renascimento da construção com alvenaria de terra 2011
- Resistance to acid attack, abrasion and leaching behavior of alkali-activated mine waste binders. Materials and Structures. 2011
- Impulso de betões auto-compactáveis (BAC's) em cofragens de paredes e pilares 2010
- Reaproveitamento de resíduos de borracha de pneus em betões 2010
- Construção sustentável: contributos do gesso para a sustentabilidade da construção. Construção Magazine - Revista Técnico-Científica de Engenharia Civil. 2010
- Tendências na sustentabilidade de unidades para alvenarias 2010
- Utilização de argamassas geopolíméricas em alternativa às resinas epoxídicas na reabilitação de betão com CFRP. Engenharia Civil. 2010
- Ligantes geopoliméricos: uma alternativa ao cimento Portland. Ingenium. 2010
- Resistência ao ataque por ácido sulfúrico de argamassas modificadas e impregnadas com polímeros. Revista Internacional Construlink. 2010
- Ligantes obtidos por activação alcalina. Parte 2. benefícios ambientais. Engenharia Civil. 2010
- Ligantes obtidos por activação alcalina: parte 1: durabilidade. Engenharia Civil. 2010
- Cimento Portland normal versus ligantes geopoliméricos: durabilidade e desempenho ambiental 2010
- Betões eco-eficientes de matriz multi-funcional 2010
- Resistência e envelhecimento acelerado de betões contendo resíduos cerâmicos. Engenharia Civil. 2010
- Eco-eficiência dos materiais de construção 2010
- Considerações sobre a sustentabilidade dos materiais de construção. Construção Magazine - Revista Técnico-Científica de Engenharia Civil. 2010
- Considerações sobre os produtos de hidratação em argamassas históricas. Engenharia Civil. 2010
- Compósitos cimentícios com fibras vegetais: um contributo para a sustentabilidade da construção 2010
- Toxicidade de materiais de construção: uma questão incontornável na construção sustentável. Ambiente Construído. 2010
- Utilização de polímeros na melhoria da durabilidade do betão 2009
- Construção em terra: o passado, o presente e o futuro. Arte & Construção. 2009
- Sulphuric acid resistance of plain, polymer modified, and fly ash cement concretes. Composite Structures. 2009
- Patologia e reabilitação de construções em terra. Arte & Construção. 2009
- Influência da adição de carbonato de sódio na reactividade térmica de lamas residuais de minas de tungsténio. Revista Internacional Construlink. 2009
- Algumas considerações sobre as argamassas de reabilitação. Construção Magazine - Revista Técnico-Científica de Engenharia Civil. 2009
- Betões armados com fibras vegetais: uma ilusão ou uma opção a explorar? 2009
- Contributos para o renascimento do betão aparente: o caso dos ligantes obtidos por activação alcalina. Arte & Construção. 2009
- Durabilidade de betões modificados com polímeros. Construção Magazine - Revista Técnico-Científica de Engenharia Civil. 2009
- Estuques antigos. Arte & Construção. 2009
- Tungsten mine waste geopolymeric binder: preliminary hydration products investigations. Composite Structures. 2009
- Argamassas aditivadas com dióxido de titânio: uma solução eficaz no combate aos graffitis 2009
- Investigação sobre a evolução da resistência em argamassas geopoliméricas à base de lamas residuais das Minas da Panasqueira. Engenharia Civil. 2008
- Ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira: resistência ao desgaste e ao ataque de soluções ácidas. Engenharia Civil. 2008
- Produtos de hidratação de ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira. Engenharia Civil. 2008
- A durabilidade do betão de acordo com a norma NP EN 206-1:2007 2008
- Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substance surface treatment. Composite Structures. 2008
- Alkali-activated binders: a review part 1. Historical background, terminology, reaction mechanisms and hydration products. Composite Structures. 2008
- Alkali-activated binders: a review: part 2. About materials and binders manufacture. Composite Structures. 2008
- Contributos do betão para a sustentabilidade da indústria da construção 2008
- Investigations of tungsten mine waste geopolymeric binder: strength and microstructure. Composite Structures. 2008
- Investigations on mix design of tungsten mine waste geopolymeric binder. Composite Structures. 2008
- Ligantes obtidos por activação alcalina de lamas residuais das Minas da Panasqueira. Resistência ao desgaste e ao ataque de soluções ácidas. Engenharia Civil. 2008
- Properties of tungsten mine waste geopolymeric binder. Composite Structures. 2008
- Tendências para a sustentabilidade dos materiais de construção 2008
- Materiais ligantes amigos do ambiente obtidos por activação alcalina de lamas residuais das minas da Panasqueira 2007
- Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders. Cement and Concrete Research. 2007
- Desempenho de ligantes geopoliméricos na reparação de estruturas de betão 2007
- Ligantes activados alcalinamente: reactividade de lamas residuais de minas após calcinação. Revista Internacional Construlink. 2007
- Ligantes geopoliméricos: uma alternativa ambiental ao cimento Portland no contexto da economia do carbono 2005
-
capítulo de livro
- Introduction to adapting the built environment for climate change 2023
- Introduction to advances in the toxicity of construction and building materials 2022
- Introduction [to "Handbook of advances in alkali-activated concrete"] 2021
- Introduction to virus, bacteria, and fungi in the built environment 2021
- Structural performance of wastebased reinforced alkali-activated concrete 2021
- Introduction to eco-efficient materials for reducing cooling needs in buildings and construction 2020
- Carbon dioxide sequestration on mortars containing recycled aggregates: A hot area for startup development 2020
- Introduction to star-tup creation for the smart ecoefficient built environment 2020
- Influence of two commercial superplasticizers and a biopolymer on the performance of waste-based alkali-activated mortars 2020
- Introduction to bio-based materials and biotechnologies for eco-efficient construction 2020
- Introduction to advances in construction and demolition waste 2020
- Introduction to eco-efficient pavement materials 2020
- Recycled household ceramic waste in eco-efficient cement: A case study 2020
- Concrete with nanomaterials and fibers for self-monitoring of strain and cracking subjected to flexure 2018
- Introduction to nanotechnology in eco-efficient construction 2018
- Carbon dioxide sequestration of fly ash alkaline based mortars with recycled aggregates and different sodium hydroxide concentrations: Properties, durability, carbon footprint, and cost analysis. Woodhead Publishing Series in Civil and Structural Engineering. 2018
- Carbon dioxide sequestration of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibers: Mechanical properties and numerical simulation with a finite element method. Woodhead Publishing Series in Civil and Structural Engineering. 2018
- Carbon dioxide sequestration of fly ash alkaline-based mortars containing recycled aggregates and reinforced by hemp fibers: Properties, freeze-thaw resistance, and carbon footprint. Woodhead Publishing Series in Civil and Structural Engineering. 2018
- Carbon dioxide sequestration on fly ash/waste glass alkali-based mortars with recycled aggregates: Compressive strength, hydration products, carbon footprint, and cost analysis. Woodhead Publishing Series in Civil and Structural Engineering. 2018
- Geopolymeric repair mortars based on a low reactive clay 2018
- Alkali-Activated Cement-Based Binders (AACBs) as durable and cost-competitive low-CO2 binder materials: some shortcomings that need to be adressed 2017
- Introduction to biopolymers and biotech admixtures for eco-efficient construction materials 2016
- Introduction to nano- and biotech-based materials for energy building efficiency 2016
- Introduction to eco-efficient materials to mitigate building cooling needs 2015
- Introduction to biotechnologies and biomimetics for civil engineering 2015
- Introduction [to] Nearly zero energy building refurbishment 2013
- Built environment life cycle process and climate change 2013
- Nanoparticles for high performance concrete (HPC) 2013
- The suitability of concrete using recycled aggregates (RAs) for high-performance concrete (HPC). Woodhead Publishing Series in Civil and Structural Engineering. 2013
- Natural fiber reinforced concrete. Woodhead Publishing Series in Textiles. 2011
- Utilization of mining wastes to produce geopolymer binders 2009
-
documento
- Introduction to the use of recycled plastics in eco-efficient concrete. Woodhead Publishing Series in Civil and Structural Engineering. 2019
- Introduction to carbon dioxide sequestration–based cementitious construction materials. Woodhead Publishing Series in Civil and Structural Engineering. 2018
- Introduction [to Eco-efficient repair and rehabilitation of concrete infrastructures] 2017
- Introduction to cost-effective energy-efficient building retrofitting. Woodhead Publishing Series in Civil and Structural Engineering. 2017
- Introduction to start-up creation for the smart eco-efficient built environment. Woodhead Publishing Series in Civil and Structural Engineering. 2016
- Introduction to eco-efficient masonry bricks and blocks. Woodhead Publishing Series in Civil and Structural Engineering. 2015
- Introduction to the environmental impact of construction and building materials. Woodhead Publishing Series in Civil and Structural Engineering. 2014
- Introduction to nanotechnology in eco-efficient construction 2013
- Introduction to the recycling of construction and demolition waste (CDW). Woodhead Publishing Series in Civil and Structural Engineering. 2013
-
livro
- Advances in the toxicity of construction and building materials 2022
- Handbook of advances in Alkali-activated Concrete 2021
- Bio-based materials and biotechnologies for eco-efficient construction 2020
- Use of recycled plastics in eco-efficient concrete 2018
- Carbon dioxide sequestration in cementitious construction materials 2018
- Nanotechnology in eco-efficient construction 2018
- Performance on an Alkali-Activated Cement-Based Binder (AACB) for Coating of an OPC Infrastructure Exposed to Chemical Attack: A Case Study 2016
- Start-up creation: the smart eco-efficient built environment 2016
- Performance of alkali-activated mortars for the repair and strengthening of OPC concrete 2015
- Eco-efficient Masonry Bricks and Blocks: Design, Properties and Durability 2014
- Self-sensing concrete with nanomaterials 2013
- A sustentabilidade dos materiais de construção 2010
- Ligantes obtidos por activação alcalina 2009
- A cal na construção 2009
- Construção em terra 2009