Publicações no PortAberta

Co-autor de rede

Mapa da Ciência

Antonio J. Pontes

Pessoa

Publicações
Fundo
Contato
Ver Todos

publicações selecionadas

artigo académico
- Evaluating the Electromagnetic Shielding of Continuous Carbon Fiber Parts Produced by Additive Manufacturing. E-Polymers. 2023
- From Transparent to Opaque: A Route towards Multifunctional Parts Injected with a Single Material. Materials. 2023
- Design and industrial implementation of a multi-functional part produced by powder bed fusion. Progress in Additive Manufacturing. 2023
- Effect of processing conditions on electromagnetic shielding and electrical resistivity of injection-molded polybutylene terephthalate compounds. Polymer Engineering and Science. 2021
- Combination of laser welding with in-mould assembling into a single process. International Journal of Materials & Product Technology. 2016
- Perceptions of Different Stakeholders on Managing Collaborative University-Industry R&D Funded Contracts. Procedia Computer Science. 2016
- Microinjection molding of polyamide 6/carbon nanotube composites. Nanocomposites. 2015
- Effect of the Injection Moulding Processing Conditions on Biopolymers Final Properties. Key Engineering Materials. 2013
- Influence of Mesh Discretization on the Prediction of Polymer Flow Behaviour in Microcavities. Key Engineering Materials. 2013
- A microinjected 3-axis thermal accelerometer. Procedia Engineering. 2011
- Flexible sensor for blood pressure measurement.. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology SocIETy, EMBS. 2011
- Predicting Shrinkage in Semi-Crystalline Injection Mouldings – The Influence of Pressure. Key Engineering Materials. 2006
- Effect of Melt Viscosity on the Ejection Force in Injection Moulds. Key Engineering Materials. 2004
- The Effect of Holding Pressure on the Shrinkage and Birefringence of Injection Moulded Polypropylene Plates 2004
- The Role of the Interaction Coefficient in the Prediction of the Fiber Orientation in Planar Injection Moldings. E-Polymers. 2003
- Assessment of the ejection force in tubular injection moldings. Journal of Injection Molding Technology. 2002
- Glass Fibre Content of PP Plates and their Properties: Part II: Tensile Mechanical Properties 2002
- Glass Fibre Contents of PP Plates and their Properties: Part I: Shrinkage and Changes in Time 2002
- Injection mould for assessment of ejection forces 2001
- Solidification criterion on shrinkage predictions for semi-crystalline injection moulded samples. International Polymer Processing. 2000
artigo de conferência
- A Design Optimization Methodology Applied to Conformal Cooling Channels in Injection Molds: 2D Transient Heat Transfer Analysis 2023
- Structural Analysis of Molds with Conformal Cooling Channels: A Numerical Study 2023
- 2D Heat Transfer of an Injection Mold: ANSYS Workbench and Mechanical APDL 2023
- 3D Heat Transfer of an Injection Mold: ANSYS Workbench and Mechanical APDL 2023
- Cellular Materials Optimisation Framework 2022
- Understanding Dimensional and Geometrical Tolerances of Metal, Polymer and Composite Powder-Bed Fusion Additive Manufacturing Technologies 2022
- Antimicrobial activity of fruit packages coated with nanomaterials based in metal-ions zeolites 2021
- A Conceptual Social Media Tool for Supporting Collaborative University-Industry R&D Programs. International ICE Conference on Engineering, Technology and Innovation. 2018
- Characterization of polymer behavior in microchannels. AIP Conference Proceedings. 2014
- In mold laser welding for high precision polymer based optical components. AIP Conference Proceedings. 2014
- Influence of the local morphology on the surface tension of injection molded polypropylene. AIP Conference Proceedings. 2014
- Shape analysis in the design process of products with embedded microelectronics 2014
- Tracking surgical instruments: From a management perspective to safety issues 2014
- Morphological aspects of injection-molded polypropylene with metallic pigments 2013
- Advanced coating systems towards the analysis of polymer flow within microcavities 2012
- Design and development of large rigid plastic packaging for olives 2012
- Design of a 3-axis thermal accelerometer using an electro-thermo-fluidic model 2012
- Flexible pressure sensors: Modeling and experimental characterization. Procedia Engineering. 2012
- Static and dynamic modeling of a 3-axis thermal accelerometer. Procedia Engineering. 2012
- Design of a pressure sensor for monitoring of post-endovascular aneurysm repair 2011
- Development of a flexible pressure sensor for measurement of endotension 2011
- Flexible sensor for blood pressure measurement. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology SocIETy, EMBS. 2011
- Nanocomposite flexible pressure sensor for biomedical applications. Procedia Engineering. 2011
- Study of pressure sensors placement using an Abdominal Aortic Aneurysm (AAA) model 2011
- CAD/CAE techniques to prevent premature failure in direct AIM moulding inserts 2007
- The effect of thermal conductivity of RIM moulds in kinetics cure 2007
- Structural and thermal aspects of the performance of hybrid moulds with SLS 2006
- The effect of fiber contents on the ejection force of deep tubular mouldings 2006
- Hybrid moulds: The use of combined techniques for the rapid manufacturing of injection moulds 2005
- Ejection of tubular polypropylene mouldings: The influence of processing and the molecular weight 2004
artigo de revista
- Development of an Open-Source Injection Mold Monitoring System. Bioengineering. 2023
- A Novel Route to Optimize Placement Equipment Kinematics by Coupling Capacitive Accelerometers. Bioengineering. 2022
- Hybrid Manufacturing of Aluminium Parts Combining Additive and Conventional Technologies—Mechanical and Thermal Properties. Journal of Manufacturing and Materials Processing. 2022
- Evaluation of Active Heat Sinks Design under Forced Convection—Effect of Geometric and Boundary Parameters. Materials. 2021
- Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting. Materials. 2021
- Design of kinematic connectors for microstructured materials produced by additive manufacturing 2021
- Development of functionalised foam for electrostatic discharge applications. Plastics Rubber and Composites Processing and Applications. 2020
- Surface functionalization of 3D printed structures: Aesthetic and antibiofouling properties. Revista Portuguesa de Estudos Regionais. 2020
- Hand-Product Contact Point Detection on Surgical Instruments – A User Evaluation. Ergonomics in Design. 2019
- Methodology for sustainable product design. Polymer Engineering and Science. 2018
- High strength injection molded thermoplastic composites. Polymer Engineering and Science. 2018
- Modeling and Optimization of the Injection-Molding Process: A Review. Advances in Polymer Technology. 2018
- Characterization of PP/TPV/MMT Ternary Nanocomposites Produced by Injection Molding. Macromolecular Symposia. 2017
- Experimental study of shrinkage and ejection forces of reinforced polypropylene based on nanoclays and short glass fibers. Polymer Engineering and Science. 2017
- Laser Welding Process in PP Molding Parts: Evaluation of Seam Performance. International Polymer Processing. 2016
- Environmental and economic performance of a car component: assessing new materials, processes and designs. Journal of Cleaner Production. 2016
- Microinjection molding of polyamide 6. Polymers for Advanced Technologies. 2014
- Dispersion of carbon nanotubes in polyamide 6 for microinjection moulding. Journal of Polymer Research. 2013
- Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites. Nanoscale. 2013
- Morphology-performance relationship of polypropylene-nanoclay composites processed by shear controlled injection moulding. Polymer International. 2013
- Polymer flow dynamics in microimpressions : an experimental approach. Materials Letters. 2013
- Polypropylene/clay nanocomposites produced by shear controlled orientation in injection moulding: Deformation and fracture properties. Journal of Mechanical Engineering. 2013
- The quest for a sustainable product: An environmental study of tyre recyclates. Materials & Design. 2013
- Uni- and biaxial impact behavior of double-gated nanoclay-reinforced polypropylene injection moldings. Polymer Engineering and Science. 2013
- Co-injection molding of immiscible polymers: Skin-core structure and adhesion studies. Polymer Engineering and Science. 2011
- Experimental assessment of hybrid mould performance. The International Journal of Advanced Manufacturing Technology. 2010
- Modeling and simulation of photofabrication processes using unsaturated polyester resins. Journal of Applied Polymer Science. 2009
- Using multi-objective evolutionary algorithms for optimization of the cooling system in polymer injection molding. International Polymer Processing. 2009
- Friction properties of moulding thermoplastics. Materials Letters. 2006
- Ejection force of tubular injection moldings. Part II: A prediction model. Polymer Engineering and Science. 2005
- Ejection force in tubular injection moldings. Part I: Effect of processing conditions. Polymer Engineering and Science. 2004
- Experimental validation of morphology simulation in glass fibre reinforced polycarbonate discs. Journal of Reinforced Plastics and Composites. 2001
capítulo de livro
- Engenharia e Design - Aditivo, contra o COVID-19 2020
- Experimental Testing and Process Parametrization. Advanced Structured Materials. 2020
- Design for Additive Manufacturing of Mechanical Connections Toward Hybrid Products. AI Communications. 2019
documento
livro