publicações selecionadas
-
artigo académico
- Nanoclays Dispersion in a PA6/PP Blend by Twin Screw Compounding. Macromolecular Symposia. 2011
-
artigo de conferência
- Suitability of agroindustrial residues for cellulose-based materials production 2018
- Can oil, plastic and RAP wastes have a new life in novel asphalt mixtures? 2015
- Development of fluorescent nanocomposites based on CdTe quantum dots 2015
- Polymeric micellar drug carriers with fluorescent properties 2015
- Biodegradable nanocomposite for food packaging application 2014
- Thermoplastic starch-polypropy/lene reinforced with clay 2014
- Recombination of asphalt with bio-asphalt : binder formulation and asphalt mixes application. Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions. 2014
- Experimental assessment of Emitted Dose from Valved Holding Chamber devices 2014
- Combining asphalt-rubber (AR) and fast-pyrolysis bio-oil to create a binder for flexible pavements 2013
- Waste polymers recycling in high performance asphalt mixtures 2011
- Near-infrared spectroscopy for the on-line characterization of nanocomposites 2011
- On-line rheometry: A tool to monitor polymer nanocomposites production. AIP Conference Proceedings. 2011
- Phase inversion of EPDM/PP blends: Effect of viscosity ratio. AIP Conference Proceedings. 2011
- Sythesis and characterization of biodegradable grafted copolymers 2010
- Changes in the rubber morphology caused by the interaction with bitumen 2010
- Monitoring rubber swelling and de- and re-vulcanization through AR elastic recovery 2010
- Rheological analysis of bitumen aging 2010
- Synthesis of biodegradable copolymers 2010
- Comportamento das Interacções entre o betume e a borracha 2009
- Influence of the Bitumen Properties on the Functional and Rheological Behaviour of Asphalt Rubber Binders 2009
- Rheological and functional evaluation of the interactions between bitumen and rubber 2009
- Rheological changes in bitumen caused by aging and by the interaction with rubber 2009
- Phosphorous removal from water by polyolefins: effect of Al2O3 addition 2008
- Biodegradability assessment of aliphatic polyesters using standard methods 2008
- Comparative study between polymeric superplasticizers 2008
- Influence of the crystallization kinetics on the microstructural properties of γ-PVDF. Key Engineering Materials. 2008
- Preparation of biodegradable materials by reactive extrusion. Key Engineering Materials. 2008
- Concrete workability and water resistance improvement using polymeric admixtures 2006
- Dynamic vulcanisation of EPDM-Based thermoplastic vulcanisates during extrusion : effect of processing conditions. Key Engineering Materials. 2006
- Influence of the crystallisation kinetics on the microstructural properties of α-PVDF. Journal of Fluid Mechanics. 2006
- Thermogravimetric study of polyethylene catalytic degradation by zeolites. Key Engineering Materials. 2006
- Transient rheological behaviour of PA6/EPM/EPM-g-MA blends. Key Engineering Materials. 2006
- Effect of experimental conditions on the grafting of maleic anhydride onto polyethylene in extruders. Key Engineering Materials. 2004
- Modelling of the grafting of maleic anhydride onto polyethylene in an extruder. Key Engineering Materials. 2004
-
artigo de revista
- Nanostructured Electrospun Fibers with Self-Assembled Cyclo-L-Tryptophan-L-Tyrosine Dipeptide as Piezoelectric Materials and Optical Second Harmonic Generators. Materials. 2023
- A Polymorph of Dipeptide Halide Glycyl-L-Alanine Hydroiodide Monohydrate: Crystal Structure, Optical Second Harmonic Generation, Piezoelectricity and Pyroelectricity. Materials. 2023
- Enhancing the Interface Behavior on Polycarbonate/Elastomeric Blends: Morphological, Structural, and Thermal Characterization. E-Polymers. 2023
- Bioinspired Cyclic Dipeptide Functionalized Nanofibers for Thermal Sensing and Energy Harvesting. Materials. 2023
- Extending High Fatty Foods Shelf-Fife from Lipid Oxidation and Microbiological Contamination: An Approach Using Active Packaging with Pomegranate Extract. Coatings. 2023
- Lead-Free MDABCO-NH4I3 Perovskite Crystals Embedded in Electrospun Nanofibers. Materials. 2022
- High Piezoelectric Output Voltage from Blue Fluorescent N,N-Dimethyl-4-Nitroaniline Nano Crystals into Poly-L-Lactic Acid Electrospun Fibers. Materials. 2022
- Optimization of Au:CuO Thin Films by Plasma Surface Modification for High-Resolution LSPR Gas Sensing at Room Temperature. Bioengineering. 2022
- Active Flexible Films for Food Packaging: A Review. E-Polymers. 2022
- Immobilization of Streptavidin on a Plasmonic Au-TiO2 Thin Film towards an LSPR Biosensing Platform. Nanomaterials. 2022
- Assessing the Compressive and Impact Behavior of Plastic Safety Toe Caps through Computational Modelling. E-Polymers. 2021
- Optimization of hybrid oil/water-swelling ethylene/propylene/diene monomer compounds. Journal of Applied Polymer Science. 2020
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- A poly-e-caprolactone based biofilm carrier for nitrate removal from water. Amino Acids. 2016
- Microstructural variations of poly(vinylidene fluoride co-hexafluoropropylene) and their influence on the thermal, dielectric and piezoelectric properties. Materials Letters. 2014
- Characterization of EVA/PLA Blends When Exposed to Different Environments. Journal of Polymers and the Environment. 2014
- Development of acrylonitrile-butadiene-styrene composites with enhanced UV stability. Journal of Materials Science. 2014
- Effect of PCL and EVA molar mass on the development of sustainable polymers. Soft Materials. 2014
- Li-ion battery separator membranes based on barium titanate and poly(vinylidene fluoride-co-trifluoroethylene): Filler size and concentration effects. Electrochimica Acta. 2014
- Nanocomposites prepared by reactive extrusion: Effect of the polymer reactive groups. Macromolecular Reaction Engineering. 2014
- Phosphorus removal by a fixed-bed hybrid polymer nanocomposite biofilm reactor. Chemistry and Ecology. 2014
- Rheological changes in the bitumen caused by heating and interaction with rubber during asphalt-rubber production. Rheologica Acta. 2014
- Development of solid polymer electrolytes based on poly(vinylidene fluoride-trifluoroethylene) and the [N1 1 1 2(OH)][NTf2] ionic liquid for energy storage applications. Solid State Ionics. 2013
- Evolution of dispersion along the extruder during the manufacture of polymer-organoclay nanocomposites. Chemical Engineering Science. 2013
- Durability of PCL Nanocomposites Under Different Environments. Journal of Polymers and the Environment. 2013
- Development of an innovative bio-binder using Asphalt-rubber technology. International Journal of Pavement Research and Technology. 2013
- Development of a quasi-dry electrode for EEG recording. Sensors and Actuators A: Physical. 2013
- Hybrid nanocomposite preparation in a batch mixer and a twin-screw extruder. Advances in Polymer Technology. 2013
- In-line near-infrared spectroscopy: A tool to monitor the preparation of polymer-clay nanocomposites in extruders. Journal of Applied Polymer Science. 2013
- Influence of the testing conditions on the efficiency and durability of stabilizers against ABS photo-oxidation. Materials Letters. 2013
- Microscopy as a powerful technique to characterise polymer matrix nanocomposites. Microscopy and Microanalysis. 2013
- Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene: A correlation study. Polymer Degradation and Stability. 2013
- Preparation and characterization of ethylene-vinyl acetate nanocomposites: Enhanced flame retardant. Polymer International. 2013
- Thermal stability of P3HT and P3HT:PCBM blends in the molten state. Materials Letters. 2013
- Mutual changes in bitumen and rubber related to the production of asphalt rubber binders. Cement & Concrete Composites. 2012
- In-line near-infrared spectroscopy for the characterization of dispersion in polymer-clay nanocomposites. Materials Letters. 2012
- Effect of crosslinking on morphology and phase inversion of EPDM/PP blends. Materials Chemistry and Physics. 2012
- Phosphorus removal from eutrophic waters with an aluminium hybrid nanocomposite. Water, Air, and Soil Pollution. 2012
- Synthesis of EVA-g-PLA copolymers using transesterification reactions. Materials Chemistry and Physics. 2012
- Synthesis of aluminium nanoparticles in a PP matrix during melt processing: Effect of the alkoxide organic chain. Reactive and Functional Polymers. 2012
- Use of biopolymers as solid substrates for denitrification. Water Science and Technology. 2012
- Measuring the rheological properties of polymer melts with on-line rotational rheometry. Materials Letters. 2011
- Stability of nanocomposites of poly(e-caprolactone) with tungsten trioxide. Journal of Polymer Research. 2011
- Biobased grafted polyesters prepared by in situ ring-opening polymerization. Reactive and Functional Polymers. 2011
- Biodegradability assessment of aliphatic polyesters-based blends using standard methods. Journal of Applied Polymer Science. 2011
- Functionalization of PET and PA6.6 woven fabrics. Applied Surface Science. 2011
- Morphology and phase inversion of EPDM/PP blends - Effect of viscosity and elasticity. Materials Letters. 2011
- Morphology development and phase inversion during dynamic vulcanisation of EPDM/PP blends. European Polymer Journal. 2011
- Plasma surface activation and TiN coating of a TPV substrate for biomedical applications. Plasma Processes and Polymers. 2011
- Removal of phosphorus from water using active barriers: Al 2O3 immobilized on to polyolefins. Environmental Technology. 2011
- Activation of polyethylene terephthalate using different plasma treatments. Journal of Optoelectronics and Advanced Materials. 2010
- Artificial and natural weathering of ABS. Journal of Applied Polymer Science. 2010
- Changes in Rubber Due to its Interaction with Bitumen when Producing Asphalt Rubber. Road Materials and Pavement Design. 2010
- Plasma surface modification of polycarbonate and poly(propylene) substrates for biomedical electrodes. Plasma Processes and Polymers. 2010
- Rheological quantification of bitumen aging : definition of a new sensitive parameter. Applied Rheology. 2010
- The effect of interfacial properties on the deformation and relaxation behavior of PMMA/PS blends. Journal of Rheology. 2010
- The role of interfacial elasticity on the rheological behavior of polymer blends. Korea Australia Rheology Journal. 2010
- a- and ¿-PVDF: Crystallization kinetics, microstructural variations and thermal behaviour. Materials Chemistry and Physics. 2010
- Contribution of the melting stage to the evolution of the morphology and chemical conversion of immiscible polyamide/polyethylene blends in twin-screw extruders. Journal of Applied Polymer Science. 2009
- DEGRADATION OF THE RUBBER NETWORK DURING DYNAMIC VULCANIZATION OF EPDM/PP BLENDS USING PHENOLIC RESOL. Rubber Chemistry and Technology. 2009
- Dispersion mechanisms of nanoclays in a polymer matrix by electron microscopy. Microscopy and Microanalysis. 2009
- Effect of antistatic additives on mechanical and electrical properties of polyethylene foams. Journal of Applied Polymer Science. 2009
- Phase inversion phenomena of EPDM /PP : based TPVs by Electronic Microscopy 2009
- Characterization of biofilm formation on a humic material. Journal of Industrial Microbiology & Biotechnology. 2008
- Continuous polymerization of e-caprolactone initiated by titanium phenoxide in a twin-screw extruder. Journal of Applied Polymer Science. 2008
-
Influence of air oxidation on the properties of decorative NbO
x Ny coatings prepared by reactive gas pulsing. Revista Portuguesa de Estudos Regionais. 2008 - On-line rotational rheometry for extrusion and compounding operations. Journal of Non-Newtonian Fluid Mechanics. 2008
-
Structural study of the oxidation process and stability of NbO
x Ny coatings. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions With Materials and Atoms. 2008 - Catalytic degradation of polyethylene: An evaluation of the effect of dealuminated Y zeolites using thermal analysis. Materials Chemistry and Physics. 2007
- Evaluation of properties and biodeterioration potential of polyethylene and aliphatic polyester blends. International Polymer Processing. 2007
- Feedstock recycling of polyethylene over AlTUD mesoporous materials. Polymer Degradation and Stability. 2007
- Photochemical aging and processability of life-time-controlled polystyrene/high-impact polystyrene blends. Journal of Applied Polymer Science. 2007
- Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends. Rheologica Acta. 2007
- Evolution of the peroxide-induced degradation of polypropylene along a twin-screw extruder: Experimental data and theoretical predictions. Journal of Applied Polymer Science. 2006
- Photo-degradability of ketone modified PS/HIPS blends. Materials Letters. 2006
-
Property change in multifunctional TiC
x Oy thin films: Effect of the O/Ti ratio. Thin Solid Films. 2006 - The effect of acidity behaviour of Y zeolites on the catalytic degradation of polyethylene. European Polymer Journal. 2006
- The effect of the compatibilization route of PA/PO blends on the physico-chemical phenomena developing along a twin-screw extruder. Macromolecular Symposia. 2006
- Monitoring Reactive Processes along the Extruder. International Polymer Processing. 2005
- Dynamic vulcanisation of EPDM/PE-based thermoplastic vulcanisates studied along the extruder axis. E-Polymers. 2005
- EPDM-based thermoplastic vulcanisates: Crosslinking chemistry and dynamic vulcanisation along the extruder axis. Polymer Degradation and Stability. 2005
- EPDM/PE-based thermoplastic vulcanites : crosslinking chemistry and dynamic vulcanisation along the extruder. Polymer Degradation and Stability. 2005
- Evolução da morfologia de fases de blendas PA6/AES em extrusora de dupla rosca e moldagem por injeção. Polimeros-Ciencia e Tecnologia. 2005
- A study of grafting reactions during processing of polyolefins. Advances in Polymer Technology. 2004
- Enhancement of the thermooxidative degradability of polystyrene by chemical modification. Polymer Degradation and Stability. 2004
- Evolution of peroxide-induced thermomechanical degradation of polypropylene along the extruder. Journal of Applied Polymer Science. 2004
- Laurolactam as a stabilizer against the thermo-oxidative degradation of poly(ether-esters). Polymer Degradation and Stability. 2004
- Online monitoring techniques for studying evolution of physical, rheological and chemical effects along the extruder. Plastics Rubber and Composites Processing and Applications. 2004
- Evolution of Chemistry, Morphology and Rheology of Various Polymer Systems along a Twin-Screw Extruder. The Canadian Journal of Chemical Engineering. 2002
- Monitoring the evolution of the properties of PA-6/EPM-g-MA blends in a twin-screw extruder. Polymer Engineering and Science. 2002
- On-Line rheometry for twin-screw extrusion (along the extruder) and its applications. Applied Rheology. 2002
- Effect of polyolefin structure on maleic anhydride grafting. E-Polymers. 2001
- Rheology of PA-6/EPM/EPM-g- MA Blends Along a Twin-Screw Extruder. Advances in Polymer Technology. 2000
-
capítulo de livro
- Polymer Blend Compatibilization by Copolymers and Functional Polymers 2016
- Assessment of polymer-based nanocomposites biodegradability 2015
- Near IR Spectroscopy for the Characterization of Dispersion in Polymer-Clay Nanocomposites 2014
- Preparation of polymer-based nanocomposites by different routes 2013
- Modification of biodegradable polymers through rreactive extrusion-I 2012
- Natural and accelerated weathering of Acrylonitrile-Butadiene-Styrene (ABS) 2011
- Using TEM and SEM to unveil the role of nanoclays in polymer blends 2010
-
documento
- Dextrin: a platform for the development of drug delivery systems 2018
- Production of erythritol by Yarrowia species from crude glycerol 2018
- Development of bacterial cellulose wound dressings with controlled delivery of vitamin D3 2017
- Development of bioplastics from agro-wastes 2015
- Development of cellulose acetate membranes containing nanoparticles for water applications 2015
- Influence of polymeric matrix on structural and photoluminescent properties of polymer-quantum dot (nano)composites 2015
- Design of assemblies based on polymer-coated quantum dots and organic dye. Abstracts of Papers of the American Chemical SocIETy. 2015
- Effect of polymeric matrix on morphology and photoelectric properties of polymer-quantum dots nanocomposites 2015
- Entrapment of CdTe quantum dots in polymeric micelles 2015
- Poly(2-hydroxyethyl methacrylate): A new star polymer. Abstracts of Papers of the American Chemical SocIETy. 2015
- Multiresponsive spiropyran-based copolymer: synthesis and characterization 2014
- Eco-friendly polymeric material for horticulture application 2014
- Synthesis of functional block copolymers by controled radical polymerization techniques 2014
- Development of silver and clay-starch bio-nanocomposites 2014
- Development of cellulose acetate membranes for water applications 2014
- Rheology as a tool to follow chemical reactions 2013
- Hybrid nanocomposite for aquatic media remediation and respective production method 2012
- Phosphorus removal from eutrophic waters with a polymer nanocomposite containing aluminium 2012
- Effect of salinity in the activity of denitrifying biofilms supported on poly Ꜫ-caprolactone 2011
- “In-situ” generation of aluminum nanoparticles in a PP matrix 2011
- Poly (epsylon-caprolactone) as biofilm support and carbon source for groundwater denitrification 2011
- On-line rheometry to monitor nanocomposites production 2011
- Rheological quantification of aging, rejuvenation and modification in bitumen 2011
- A novel automoted on-line extensional rheometer to monitor the extrusion process 2011
- Bionanocomposites based on poly(e-caprolactone) and titanium 2011
- Bionanocomposites prepared by a sol-gel process in the melt 2011
- Development of novel conformable electrode for surface bio-potential measurement 2011
- Effect of weathering conditions on the degradation behaviour of ABS 2011
- Grafting of PCL to EVA by reactive processing: effect of PCL molar mass 2011
- Hybrid polymer containing in-situ generated aluminum nanoparticles 2011
- Influence of EVA molar mass on preparation of EVA-g-PCL biobased copolymers 2011
- Near-infrared spectroscopy for on-line monitoring of nanoclay dispersion in polymer nanocomposites 2011
- On-line rheometry to monitor nanocomposites production at the industrial scale 2011
- UV stability of biobased copolymers 2011
- Using on-line rheometry to monitor dispersion phenomena during the preparartion of nanocomposites 2011
- Nanomaterials for water treatment 2010
- Phosphorus removal from water by polyolefins activated with Al2O3 2008
- Characterization of biofilm formation on a humic material 2007
- Preparation of biodegradable materials by reactive extruction 2007
- Evaluation of the biodegradability of blends of polyethylene and aliphatic polyesters 2006
-
livro
- Development of permeable reactive barrier for phosphorus removal 2010
- Role of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS) in ABS stabilization 2010
- Synthesis of biodegradable copolymers based on ethylene vinyl acetate and polylactic acid 2010
- The morphology during extrusion of PA6/PP blends in the presence of nanoclays 2010